E’ stato rilasciato un nuovo aggiornamento firmware per l’interfaccia 1541 Ultimate di Gideon. Questa versione del firmware funziona con tutte e due le versioni della cartuccia Ultimate 1541.
Version 2.4 includes the fixes that TLR made to the firmare, and adds the following features:
- CRT load (just by selecting the file, not on boot time)
- EasyFlash support (reading only, writing is not needed IMHO)
- Flashing and running custom FPGAs (Ultimate-II only), especially for those who want to do FPGA development without JTAG cable. FPGA bitfile will be flashed into the spare area of the Flash memory device, and the FPGA is booted from there. So there is no risk of bricking your device. (Flashing needs to be done for every boot still, optimizations will follow.)
For the rest, a lot of work has been done ‘under the hood’; especially in preparation of a native command interface to control the Ultimate from I/O space. But since this is not yet ready, it’s not included (=not enabled) in the 2.4 firmware.
Download:
source: 1541ultimate.net
La cartuccia EasyFlash versione III di Skoe e’ disponibile sul sito Retro-Donald. Come per la versione precedente il codice VHDL è open source.
Questa versione introduce diverse novità, tra cui:
- Emulazione del Kernal (senza bisogno di modifiche hardware).
- Se si sceglie di utilizzare l’emulazione del Kernal la RAM sarà tutta disponibile.
- Possibilita’ di scegliere 8 Kernal.
- Possibilita’ di scegliere 7 EasyFlash.
- Connettore USB per gli aggiornamenti Firmware.
- Emulazione FinalCartridge III, ActionReplay…
source: retro-donald.de skoe.de
Sono stati rilasciati dai gruppi TRIAD e Dinasours. nuovi giochi per Commodore 64.
Download:
source: noname.c64.org/csdb
Autopsy:
Dopo 8 lunghi mesi di attesa ho finalmente ricevuto l’interfaccia Ultimate 1Mb di Candle’o'Sin.
L’interfaccia Ultimate 1Mb è un’espansione per Atari XE/XL.
Questa interfaccia e’ stata studiata per adattarsi al tipo di hardware che si vuole utilizzare; XE / XL / XEGS / 1200XL
Caratteristiche tecniche:
- To be as much solderless as possible (only RW, PHI2, HALT and RESET lines need soldering)
- Fully flashable SpartaDOS-X with up to 320kbytes for its purposes
- RTC module for SDX with battery backup and NVRAM
- Fully flashable 4 OS ROM slots
- Hardware WRITE PROTECT for whole Flash array
- Configurable memory expansion with 4 modes of operation (disabled, 320k RAMBO, 578k COMPY SHOP, 1088k RAMBO)
- Customizable BASIC and MISSLE COMMAND slots (also flashable)
- System select/Memory exp mode select from integrated BIOS
source: spiflash.org atariage.com
Recent Comments