CBM-Command is a disk manager for the Commodore 64 / Commodore 128 / Commodore VIC20 / Commodore C16 computers. It is written like Norton Commander or Midnight Commander, but is much simpler due to the target platforms. Both the C128/C64/VIC20/C16 have their own native version of the application.

Release Notes – Version 1.7 Release Candidate – 2010-08-19

New Features:

• Realtime statistics on file copy and disk image operations.

Changes:

• Fixed bug where disconnecting the drive set as default for the left panel would cause CBM-Command to freeze.
• Fixed bug where using a long name for a created D64 would cause CBM-Command to always treat the drive as a 1581.
• Fixed bug where the name input dialog for creating a D64 had junk in it.
• Other bug fixes that I cannot remember right now.

source: cbmcommand.codeplex.com

A new version of the firmware for the interface 1541 Ultimate II is released.

Some major fix:

• Update fixed => C64 should be taken out of reset otherwise keyboard won’t work.
• RTC speed correction implemented.
• Screen flicker removed by not clearing the screen upon “draw()”
• Double file name fixed at create D64.
• C64 kept in reset to avoid basic screen before cart screen.
• C1541 rom load fixed.
• Delete file implemented.
• Sorting of dir entries (DIR first) still needs to be tested.
• REU Filetype added.
• Double filenames fixed.
• Rename fixed (I think!)
• Error handling improved, error strings added.

download: 1541ultimate.net

A new version of the firmware for the interface 1541 Ultimate II is released.

Some major fix:

• Added: Built-in flash protection to avoid more units to ‘die’.
• Fixed: Joystick Right on PRG file still crashes UltimateII.
• Fixed: Mount & Run starts disk mounted Write Protected.

download: 1541ultimate.net

SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 microcontroller from the Atmel AVR microcontroller family.

The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).

Changelog:

2010-08-06 – release 0.10.0pre1

• GEOS 2.0 support (d64/d71/d81 images only)
• File-based M-R emulation.
• Removed “oldnkc” configuration.

source: sd2iec.de gitweb forum thread c64-wiki

Snake Oil Software presents Snake on a Plane for Commodore 64. It’s inspired by a fake game cover for an Atari 2600 game based on the film Snakes on a Plane.

source: noname.c64.org

SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 microcontroller from the Atmel AVR microcontroller family.

The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).

Changelog:

2010-08-02 – release 0.9.3

• Bugfix: Extension hiding works again with names >12 characters.
• Bugfix: Increase data hold time during standard TALK.
• Testing aid: card detect-to-LED function.

source: sd2iec.de gitweb forum thread c64-wiki

CBM-Command is a disk manager for the Commodore 64 / Commodore 128 / Commodore VIC20 / Commodore C16 computers. It is written like Norton Commander or Midnight Commander, but is much simpler due to the target platforms. Both the C128/C64/VIC20/C16 have their own native version of the application.

Release Notes – 2010-07-27 – Version 1.6

New Features:

• None.

Changes:

• (All) Fixed major bug causing directory corruption when using the select all hot key to initiate file copy operations.
• (All) New progress bar that updates more frequently and is more meaningful to view.

Known Issues:

• Screen corruption when viewing a drive with no disk in it.

source: cbmcommand.codeplex.com

from 1541 Ultimate homepage:

• Last firmware version: 2.0RC5 is now downloadable from the download page.

• Ultimate-II sources released!

You can access them through  http://svn2.xp-dev.com/svn/1541UltimateII/.

For those who know how to use SVN, you can do a checkout to create a local working copy by typing:

svn co http://svn2.xp-dev.com/svn/1541UltimateII/trunk

in an empty directory. I am working on a short manual, and on access to the tools needed to build the project. This time, the FPGA sources have been released as well. ;-)

source: 1541ultimate.net

CBM-Command is a disk manager for the Commodore 64 / Commodore 128 / Commodore VIC20 / Commodore C16 computers. It is written like Norton Commander or Midnight Commander, but is much simpler due to the target platforms. Both the C128/C64/VIC20/C16 have their own native version of the application.

This version encompases many enhancements and improvements of existing functionality, as well as inclusion of new target platforms (VIC 20, Plus 4) and features (D81 support, Configuration Color Picker).

Release Notes – 2010-07-21 – Version 1.5

New Features:

• (ALL) New color picker for the configuration program.
• (64, 128, PLUS 4) 1581 Disk Image (D81) Support.
• Added support for Commodore Plus 4 computer.
• 32K Expanded VIC-20 now supported.

Changes:

• (ALL) Removed CTRL key from hot keys that previously required it. Hot keys the use the C= key still require it.
• (ALL) If you have 1 or more files selected (highlighted) and choose delete, all selected files will be deleted. If you do not have any files selected (highlighted) then only the file that the selector is pointing to will be deleted.
• (ALL) When you rename a file the textbox is pre-populated with the name of the old file.
• (VIC 20, Plus 4) Configuration files are enabled and working correctly.
• (ALL) Changed the UI for file transfers to use a new progress bar to give feedback on the copy operation.
• (64, 128, Plus 4) Changed the UI for disk image creation/writing to use a new progress bar to give feedback on the image operation.
• (VIC20) Refactored many of the screens to better fit the 22×23 layout.
• (VIC20) Filename shortening removed and the file type moved to the left of the directory display.
• (PLUS4) Created color scheme to match the environment.
• (VIC20) Panels are not displayed side by side, only one panel is displayed at a time.
• (VIC20) D64 support is removed, the RAM was needed elsewhere.
• (ALL) The screen has been made more scalable.

Known Issues:

• None.

source: cbmcommand.codeplex.com

CBM-Command is a disk manager for the Commodore 64 / Commodore 128 / Commodore VIC20 / Commodore C16 computers. It is written like Norton Commander or Midnight Commander, but is much simpler due to the target platforms. Both the C128/C64/VIC20/C16 have their own native version of the application.

Release Notes – 2010-07-13 – Version 1.0.3/1.0.4

New Features:

• (ALL) New color picker for the configuration program
• (64, 128, PLUS 4) 1581 Disk Image (D81) Support

Changes:

• (ALL) Removed CTRL key from hot keys that previously required it. Hot keys the use the C= key still require it.
• (ALL) If you have 1 or more files selected (highlighted) and choose delete, all selected files will be deleted. If you do not have any files selected (highlighted) then only the file that the selector is pointing to will be deleted.
• (ALL) When you rename a file the textbox is pre-populated with the name of the old file.
• (VIC 20, Plus 4) Configuration files are enabled and working correctly
• (ALL) Changed the UI for file transfers to use a new progress bar to give feedback on the copy operation.
• (64, 128, Plus 4) Changed the UI for disk image creation/writing to use a new progress bar to give feedback on the image operation.

Known Issues:

• (VIC 20) Many of the keyboard shortcuts on the left side of the keyboard do not work under VICE. After speaking with members of the VICE team they are pretty sure this is a problem in the GETIN kernel routine which is used by cc65. I would greatly appreciate it if someone with a real VIC can verify that the keys do not work on real hardware before I bring the problem up in the cc65 forums.
• (Plus 4) Viewing a text file crashes the program.

source: cbmcommand.codeplex.com

This is the last notice for the Ultimate 1541 version 2.

from 1541 Ultimate homepage:

• 184 Ultimate-II units shipped.
• The last few (5) will be shipped out tomorrow….
• If you paid after June 1, you will need to wait until the new production batch is finished.  (Refund possible..)
• New production startup in progress!
• Unprocessed payments will be processed before the end of the week (week 27). Please hold your payments until further notice!
• Question of redistributing the Free Xilinx tools within a virtual machine is under review by the legal department of Xilinx. If they approve, I can provide the planned virtual machine; if not, I will need to write instructions on how you can instal the tools separately.
• Last firmware version: 2.0RC4. Downloadable update available by end of week 28.

source: 1541ultimate.net

CBM-Command is a disk manager for the Commodore 64 / Commodore 128 / Commodore VIC20 / Commodore C16 computers. It is written like Norton Commander or Midnight Commander, but is much simpler due to the target platforms. Both the C128/C64/VIC20/C16 have their own native version of the application.

Release Notes – 2010-07-09 – Version 1.0.1/1.0.2

New Features:

• Added support for Commodore Plus 4 computer.
• 32K Expanded VIC-20 now supported.

Changes:

• (VIC20) Refactored many of the screens to better fit the 22×23 layout.
• (VIC20) Filename shortening removed and the file type moved to the left of the directory display.
• (PLUS4) Created color scheme to match the environment.
• (VIC20) Panels are not displayed side by side, only one panel is displayed at a time.
• (VIC20) D64 support is removed, the RAM was needed elsewhere.
• (ALL) The screen has been made more scalable.

Known Issues:

• (VIC20) Many of the keyboard shortcuts on the left side of the keyboard do not work under VICE. After speaking with members of the VICE team they are pretty sure this is a problem in the GETIN kernel routine which is used by cc65. I would greatly appreciate it if someone with a real VIC can verify that the keys do not work on real hardware before I bring the problem up in the cc65 forums.
• (VIC20) I still haven’t figured out why saving the configuration doesn’t work. :(
• (VIC20) CTRL-D and CTRL-E don’t work.
• (VIC20) The launcher doesn’t yet know about the VIC, so it loads the wrong version of CBM-Command.
• (VIC20) The configuration tool cannot save.

source: cbmcommand.codeplex.com

New 8 Bit Software – Scavenger, Penultimate Fantasy and DungeonExplorer for Commodore 64.

source: noname.c64.org

SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 microcontroller from the Atmel AVR microcontroller family.

The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).

Changelog:

2010-06-21 – release 0.9.2

• Bugfix: Rename was broken on FAT.
• Turbodisk is now disabled when running on internal RC clock.
• Button debounce timeout increased.

source: sd2iec.de gitweb forum thread c64-wiki

Autopsy:

For a new review see the italian version of this article.

from C64Scene Homepage: This project is interesting not only because it’s another mass-storage solution but because it combines already existing solutions to a new and fresh product. Damiano has always followed all the Commdore related websites and forums especially concerning the MMC and SD2IEC projects.

That’s when he got the idea to build a solution for which one doesn’t need soldering, wire cutting or the IEC cable. C64SD utilizes the Datasette connector to power the SD2IEC circuit. An IEC connector connects right into the IEC port.

The whole module stand vertical along the back of the C64 (or VIC20). The module is fitted with two rather large buttons, one reset and one diskswap/multi-function button.

SD-CARD Tested:

SANDISK SD-CARD 2GB = 100% WORKING.
CORSAIR SD-CARD 512MB = 100% WORKING.

source: c64sd.roxer.com c64wiki sd2iec c64wiki sd2iec firmware

from 1541 Ultimate homepage:

Finally, the software for the 1541 Ultimate II is finished. In the last two weeks, an enormous amount of work has been done:

• USB is now working stable, including insertion and removal.  (My external 500 GB harddisk was detected flawlessly!)
• Support for USB devices with multiple LUNs (like card readers)
• GCR (G64) supported added, including write (the Ultimate-I couldn’t do this)
• T64 file support re-integrated.
• Tape support, using TAP files (I needed to test the hardware anyway!)
• Comprehensible menus.
• Real time clock functional  (still need a clock widget…)
• I made a wooden mould, to simplify closing the plastic cases without damaging them.

The plan is, to ship the first 40~50 units this coming Wednesday! The remaining units will follow as soon as possible!  Thank you for your patience!

source: 1541ultimate.net