Home > Gallery, Philips, Projects / Repairs, Retro Computers and other stuff..., Today, Various > Philips Videopac G7000 (PAL) RGB Video Mod

Philips Videopac G7000 (PAL) RGB Video Mod

Philips Videopac G7000 with RGB Output

Details:

I have found this RGB mod for the Philips Videopac G7000 console fom the gamesx site and i have decided to build the circuit to see if it works.

This mod is not easy to do, especially if one has no experience in electronics, however the result at the end is spectacular.

RGB DAC Schematics (click to zoom):

Download: Philips VideoPac G7000 Schematics (1752)

source: gamesx.com

  1. August 24th, 2014 at 11:13 | #1

    Hello,

    I’ve just finished my atari 2600 mod (french, with 8 colors … soon available on my blog) and this topic is my next project.
    Thank you for the schematic, it will help me.

    keep sharing your (very good) work on the net !

    eddy

  2. eddy
    December 10th, 2014 at 09:36 | #2

    Hello,
    it’s me … again. I’m about to modify a C52 model. This french model is quite similar to PAL ones. There is non SECAM encoder directly soldered on the mother board, but a SECAM daughter board. Between these 2 boards there is a connector on which I can find RGB, Audio and LUM signals … there is a “Composite Synchro” Signal too. I think I can use this signal but GamesX schematic deals with !SYNC (this signal is inversed)
    Which signal did you take into account ? What about the inversion ?
    Thank you for the answer (you can answer by mail if you want)

    Speak you soon.

  3. December 10th, 2014 at 15:02 | #3

    @eddy

    Hi Eddy

    The exclamation saying ALERT.

    You can use this signal only for the SYNC + R G B and not for Composite (VIDEO+SYNC).

  4. eddy
    December 11th, 2014 at 09:56 | #4

    @xAD / nIGHTFALL

    Hello,

    first thank ou for your answer … but I disagree: even if I don’t know the purpose of the diode, the schematic of the SYNC amplifier is an inverter circuitry. So I expect that your SYNC signal is made with “down to up” pulses (the RGB signal, as composite signal, need “up to down” pulses”)

    The SYNC signal is taken at the input of the PAL encoder, and not provided by the Video Encoder.

    On the SECAM version of this game system (Radiola JET 25 or Philips C52) the video encoder provides a named CSY signal, wich is a “down to up” pulses. But this signal is not directly available on the main connector.
    On this connector there is a synchro composite signal (up to down pulses) I think it may synchronize the RGB signal as well (but beed to be lowered)

    So, before I begin to work, I wanted to have no doubt. Can you telle me where did you take the SYNC signal on the main board ?

    Again, thank you.

  5. December 11th, 2014 at 12:51 | #5

    @eddy

    I takr the SYNC signal from IC679 (612160-3) Pal Encoder.

  6. eddy
    December 11th, 2014 at 15:54 | #6

    @xAD / nIGHTFALL
    just as GamesX said … hummm … It seems to be not no easy with my SECAM machine … I see only one solution: to make tests on several pins with several amplifiers (with and without inverter)

    bye

  7. MisthaLu
    November 9th, 2016 at 11:53 | #7

    My mate has been installing this mod in my G7000 for me, but we’re experiencing the strangest thing.
    While the picture itself is very good, the colours are acting really strange: Purple becomes black. White becomes green. Red becomes dusty green.
    The boot picture “SELECT SCREEN” seems fine regarding colours. For example, the purple colour in the “E” is fine. But when we start a game, the colours aren’t correct anymore. E.g. the purple background in Race is black.
    This happens on any TV we connect to, be it LCD or CRT or even the X-RGB Mini Framemeister.

    Does anyone have any ideas about this?

*