Archive

Archive for the ‘OSx/Linux/Win Tools’ Category

Gotek HxC Firmware v3.1.1.1a

January 15th, 2018 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

Release notes Firmware USB HxCFloppyEmulator v3.1.1.1a:

  • Fix broken Rotary support in normal mode. (Connection points reminder : Clock -> J7 pin 2,Direction -> J7 pin 1)

This is only a little part of the changelog. The original one is very long and you can read it here.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.1.1.1a (303)

source: hxc2001.com

CBM prg Studio v3.12.0 released

January 13th, 2018 No comments

CBM prg Studio Version 3.12.0 is released. There are a lot of new features in this version. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.

CBM prg Studio allows you to type a BASIC or Machine Code program in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 / VIC20 or PET if you’re feeling brave and have the right kit.

CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.

It was also a good opportunity for a face lift and to add some new features, such as:

  • Programs are project based, meaning all related source files, sprite files etc. are kept in one place and multiple source files can be linked more easily.
  • Tabbed MDI.
  • Syntax highlighting.

What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.

New features in v3.12.0:

  • Assembler:
    • SaveBlock directive.
    • Repeat..EndRepeat directive.
    • Improved “IfDef” directive.
    • Start address can be a label.
  • Screen Editor:
    • New export options for assembly and BASIC programs.
  • General:
    • “Go to” dialog can now use BASIC line numbers.
    • Cursor colour can be changed.
    • Cursor blinking can be turned on/off.
  • Debugger:
    • Variables can be watched.
    • Separate windows for the stack, breakpoints and watches.
    • Stack pointer shown in stack window.
    • Support for the “C64 Debugger”. See here for details of this debugger.

Bugs Fixed:

  • Assembler:
    • A comma in quotes as a text or byte directive was not being generated.
    • Reformatting text issues.
    • Global variables appearing twice in the autocomplete list.
    • Forward references for local labels in macros not assembling.
  • BASIC:
    • Incorrect ‘Jump to destination’ and ‘return from jump’ with ‘similar’ line numbers.
  • Screen Editor:
    • Screen mode not being saved/recalled properly.
    • Binary file export problems.
  • General:
    • Crash when using certain mono fonts.
    • Bad formatting of output from data generator tool.

See the help for a complete list of new features and fixed bugs.

Note In this version, each target machine can have its own default project directory. If you are upgrading from a previous version (before version 2.5.1) of CBM prg Studio you may be asked to set up your project directories again. Your current projects will not be affected.

Download: CBM prg Studio v3.12.0 (356)

source: ajordison.co.uk

Hoxs64 Commodore 64 Emulator Updated v1.0.9.6

January 2nd, 2018 No comments

Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+)

The emulator substantially reproduces this legacy machine in minute detail.

Changelog:

  • CIA old timer B bug timing fixes for Wilfred Bos’s alternate version of the dd0dtest.
  • Updated 8580 SID combined wave with slightly improved samples from a real C64C CSG 8580R5.
  • Added a new joystick setting to enable the use all fire buttons.
  • Added separate VBL sync or line sync options for both Direct X full screen and windowed mode.
  • Fixed the “Stretch with border clip” in some resolutions to provide a more optimal zoom.

Download:

source: hoxs64.net

Gotek HxC Firmware v3.1.1.0a (More direct raw formats support)

December 19th, 2017 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

Release notes Firmware USB HxCFloppyEmulator v3.1.1.0a:

More direct raw formats support :

  • Akai formats (*.IMG)
  • Casio FZ1 (*.FZ1)
  • Emax machines formats (*.IMG)
  • Ensoniq EPS & Mirage series formats (*.IMG)
  • General Music formats (*.IMG)
  • Korg formats (*.IMG)
  • X68000 (*.HDM,*.XDF)
    • Internal optimizations.

This is only a little part of the changelog. The original one is very long and you can read it here.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.1.1.0a (270)

source: hxc2001.com

Gotek HxC Firmware v3.1.0.4a (New direct file formats support)

December 4th, 2017 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

Release notes Firmware USB HxCFloppyEmulator v3.1.0.4a:

Major update!

  • New direct file formats support (Read & Write !) :
    • Acorn machines : *.ADL,*.ADM,*.SSD,*.DSD and *.ADF file support
    • Camputer Lynx : *.LDF
    • Commodore C64 : *.D81
    • Thomson machines : *.FD
    • Sam Coupé : *.SAD, *.MGT
    • MSX Machines : *.IMG, *.DSK
    • Spectrum : *.TRD, *.SDD
  • New menu entry : Target system family selection.
    • This reduce a lot the risk of erroneous raw file identification.
  • Lots of RAW file support improvements :
    • All sector sizes supported, advanced track skew and interleaving support.
    • FM & MFM support.
  • Amstrad CPC DSK support : Fix for the One Disk/double sided Batman demo.
  • Fix attempt of the “diymore.cc” OLED screens : OLED init screen delay  menu option added.
    • (Note : Please avoid these “diymore.cc” screens until i got an idea what is the root cause of the issue.)
    • Internal improvement : Track cache layer improved, RAW files support/identification improved.

Release notes Firmware USB HxCFloppyEmulator v3.0.33.12a:

  • Extra LCD size option added :
    • 2×40 characters (for 2×40 I2C-HD44780 screens)
  • Clear internal settings function : Press “up” button at power up to Clear the settings with the default values.
  • SP1200 write support fix.

This is only a little part of the changelog. The original one is very long and you can read it here.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.1.0.4a (408)

source: hxc2001.com

Gotek HxC Firmware v3.0.33.4a (CPC DSK images now are supported)

October 27th, 2017 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

Release notes Firmware USB HxCFloppyEmulator v3.0.33.4a:

  • CPC DSK / RAW DSK : If not a CPC DSK file, open it as a RAW image.
  • RAW Image : *.DSK and *.OUT files support added.
  • System tick optimization.
  • OLED screen support : Characters generator code speed optimization.
  • Config-Less Mode :
  • More CPC DSK format variant support.(again !)
  • More CPC DSK format variant support.
  • Amstrad CPC EDSK & DSK : Fix some DSK identification issues.
  • Amstrad CPC EDSK & DSK : Fix file type detection with CPC File selector v2.5
  • Amstrad CPC EDSK & DSK : Write Support working !
  • Amstrad CPC EDSK & DSK support : Fix issues with non-standard sector size images (Midline Process…).
  • Amstrad CPC DSK direct support added (Old and new format) : Read only for the moment.  Write support and simple copy protection support incoming ;).
  • New setting menu item : auto selection setting. You can now set the desired timeout for the auto selection function or disable it.
  • Normal mode : Fix random “Bad file” and IMG read issue at power up/USB stick change.
  • Some optimizations.
  • Write pipeline issue fixed.
  • Fix : IMG/IMA/DSK and ST files are now visible in normal/direct browsing mode.
  • Rotary support added. Connections points : Clock -> J7 pin 2,Direction -> J7 pin 1.

This is only a little part of the changelog. The original one is very long and you can read it here.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.33.4a (310)

source: hxc2001.com

Hoxs64 Commodore 64 Emulator Updated v1.0.9.4

September 18th, 2017 No comments

Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+)

The emulator substantially reproduces this legacy machine in minute detail.

Changelog:

  • CIA serial and CNT timing improvements thanks to test programs written by Mariusz.
  • Added VIC-II colour palette user configuration dialog box.
  • Added command line options (see hoxs64.txt) to support the VICE 64 testbench.
  • Changed the colour RAM reset pattern to use bytes $0C and $03 as per the same C64C whose RAM reset pattern is already used.

Download:

source: hoxs64.net

CBM prg Studio v3.11.0 released

September 18th, 2017 No comments

CBM prg Studio Version 3.11.0 is released. There are a lot of new features in this version. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.

CBM prg Studio allows you to type a BASIC or Machine Code program in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 / VIC20 or PET if you’re feeling brave and have the right kit.

CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.

It was also a good opportunity for a face lift and to add some new features, such as:

  • Programs are project based, meaning all related source files, sprite files etc. are kept in one place and multiple source files can be linked more easily.
  • Tabbed MDI.
  • Syntax highlighting.

What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.

New features in v3.11.0:

  • Assembler:
    • CTRL+Double click on label or variable will take you to its definition.
    • Mouse over a directive to get a tooltip of its usage.
    • Control/screen codes can be embedded in text strings.
  • Debugger:
    • Default watch list.
  • Sprite Editor:
    • Number keys for quick colour change.
  • Screen Editor:
    • Quick colour change.
    • Screen editor can generate data to basic string array.
  • BASIC:
    • Super Expander basic extension for VIC 20 projects.

Bugs Fixed:

  • Assembler:
    • Having ‘*=’ in a comment causes an error
    • Macros weren’t appearing in the macro viewer
    • Multiple macro parameters in the same line were being ignored.
  • BASIC:
    • Incorrect line warning length for VIC20 projects.
  • Screen designer:
    • Crash when exporting C128 screens.
  • Sprite Editor:
    • Fail when importing from listing when the target line number was also in another part of the listing.
  • Character Editor:
    • Fail when importing from listing when the target line number was also in another part of the listing.

See the help for a complete list of new features and fixed bugs.

Note In this version, each target machine can have its own default project directory. If you are upgrading from a previous version (before version 2.5.1) of CBM prg Studio you may be asked to set up your project directories again. Your current projects will not be affected.

Download: CBM prg Studio v3.11.0 (309)

source: ajordison.co.uk

USB Stick STM32 (Gotek) HxC Floppy Emulator: Firmware v3.0.20.1a

August 8th, 2017 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

Release notes Firmware USB HxCFloppyEmulator v3.0.20.1a:

  • Low level I2C & LCD IO redesigned and optimized.
  • Long names are now scrolling on the LCD during floppy emulation.
  • Short name image type identification issue fixed.
  • USB “Hot plug” support fixed in autoboot/”file selector” mode.
  • Fix the config file access error when the file haven’t the archive flag set.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.20.1a (532)

source: hxc2001.com

USB Stick STM32 (Gotek) HxC Floppy Emulator: Firmware v3.0.19.2a

August 5th, 2017 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

Release notes Firmware USB HxCFloppyEmulator v3.0.19.2a:

  • New buttons behaviour and better debouncing filter. Navigation user-experience should be better now.
  • Disk Eject function : Press both buttons to eject the disk. Working in indexed, autoboot mode, and normal mode.
  • “Eject at power up” option added.
  • Support up to 999 Images in autoboot mode (with the File selector) (Use the new CFG file and selector to use this feature)
  • LCD : Display refresh improvements.
  • New CFG file format : Some new flags and no more slots/disk drive limitation.
  • Some critical parts rewritten in assembly. Huge code speed improvement -> Better HD density reliability. ED density to be tested ;).
  • Code size reduced.
  • Advanced USB mass storage cache implemented to improve read/write reliability.   (Btw : Now when track size can be stored into the SRAM, the emulator will not read forever the data from the stick but use the cached data instead).
  • IMG/ST file write support done.
  • Huge RAW (*.ADF/*.ST/*.IMG) Write performance enhancement (Write 2 tracks at once !)
  • RAW *.IMG files can be used in indexed mode : Name the files DSKA0000.IMG,DSKA0001.IMG,DSKA0002.IMG,…
  • HFE write performance enhancement.
  • “Autoboot.hfe not found” message added.
  • 7 segments display “dots” glitch fixed.
  • 128 & 256 bytes sectors support added in raw mode.
  • FM support : Write to HFE file fixed.
  • FM support : Raw (*.dsk) read/write support.
  • New File format support (WIP) : HFEv3. Can now support copy protected images converted from IPF and others similar formats !  Variable bitrate supported (CopyLock & SpeedLock). Weak/Flakey bits support to be added !
  • Fix IPF support for these games: Jim Power, Z-Out,Xenon 2,Ghosts’n Goblins,Rainbow Islands,B.A.T II  and probably some others !
  • Slot number printed on the second line during slot search with an LCD.
  • XCopy write issue fixed.
  • Sound buzzer output on the “JB” jumper position. You can connect a piezo or a magnetic buzzer (transistor needed for the magnetic version).  The sound output can be disabled or enabled into the selector settings.  (Note : Please remove these old sound mod using directly the step signal, they are producing reliability problems…)
  • Mixed track format/density write support fixed (To be tested!).

Current direct images support:

  • *.HFE (RW),*.HFE V3 (RW) (early write support), *.ADF (RW), *.ST (RW), *.IMG (RW).
      Note : HFE files is a multiplatorms floppy image format supporting many systems and disk formats.

Selector software:

  • New Bootblock for the Amiga version : The file selector is now “trackloaded” and start faster.
  • Speed up the sub-directory change/browsing.
  • Can start an image from the slot page with the F7 key.
  • The File selector is now available under Windows and Linux ! : You can now edit the list from a PC !. (Compatible with all SD/USB HxC drives !)  To launch it : HXCFEMNG -disk:[SD/USB drive letter:]  See the selector readme file for more details.  This is a new selection solution for all others machines without native file selector available.
  • Linux/Windows version : You can now import from txt file / export to txt file / auto populate / check / fix and clear your slots configuration.  Very useful for fast populating and compilations duplication ;)
  • Windows version : Fix big size (>8GB) usb stick/sd access issue.
  • populateslots option : autoboot.hfe filtered.

Converter / HxC Software:

  • WIP : HFEv3 Import/export support added. This format support copy protections (variable bitrate protections and soon weakbits protections).

Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.19.2a (695)

source: hxc2001.com

HXC STM32 (Gotek) & SD HxC new Amiga files selector v1.48a

July 21st, 2017 No comments

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) today has released via Facebook a new Amiga Files Selector for HXC STM32 (Gotek) & SD HxC Floppy Emulator.

The main improvement of this version v1.48a is the bootup of the file management program that is loaded much faster.

Download:

source: hxc2001.com

CBMXfer v1.00 (Front-End for CBM4Win/CBMLink/ZoomFloppy)

April 9th, 2017 No comments

CBMXfer is a front-end to several command-line utilities for transferring files and working with disk images. CBMXfer makes using those utilities easy by providing a familiar windows interface that removes the need to learn the commandline syntax of each program. CBMXfer also includes a multi-format file and picture viewer.

The commandline utilities are:

  • OPENCBM – transfers files/images to/from a real CBM drive connected via an ‘X-cable’ on the parallel port.
  • CBMLINK – transfers files/images to/from a real CBM drive connected to a real CBM computer connected to the PC via a serial cable.
  • C1541 – a utility from VICE that works with CBM Image Files (ie: D64,D71,D81 files).
  • NIBTOOLS – Utilities to transfer images via parallel port. Supports protected disks.
  • IMGCOPY – Utility to image IEEE and 1581 disks.

What can I do with it?

  • Transfer files to or from real CBM drives
  • Create D64 and other images files from real CBM disks
  • Write D64 and other files back to real CBM disks
  • Transfer files from WITHIN Image Files
  • View Commodore files (BASIC, SEQ, Binary, ML, Chr Sets, and Images). Supports all all machine types
  • ML viewer is a full two-pass symbolic disassembler!
  • Simple file operations like copy, delete, rename
  • Launch VICE and attach disk images plus autorun
  • Zoom Floppy supported.
  • Supports 1581 partitions with OpenCBM
  • Format disks
  • Supports IEEE drives with Zoom Floppy
  • Supports reading/writing/viewing P00 files.

Download: CBMXfer v1.00 (613)

source: Steve J. Gray Homepage

Javatari.js v4.0.1 – Atari 2600 emulator designed for the Web

April 3rd, 2017 No comments

Javatari is a new cross platform Atari 2600 emulator designed for the Web.

It’s great for displaying games running inside webpages. You can launch the emulator and load ROMs with a single link. And now you can play Atari 2600 games with touch controls on your Android/iOS device, even when offline!

New in Version 4.0:

  • Support for mobile iOS and Android devices
  • Finally enjoy Atari 2600 games on your iPhone/iPad!
  • Customizable Touch Controls, with Haptic feedback
  • Install as a WebApp on iOS/Android/Desktop, then run offline!
  • Open files from local storage, iCloud, Google Drive, Dropbox, web links
  • Higher resolution GUI for high-density displays, Retina displays
  • Menu navigation by keys. Easy GUI switches for most used options

Features:

  • Cross platform HTML5/JS. Runs in any Browser, tested in Chrome/Firefox/Safari
  • Finally enjoy Atari 2600 games on your iPhone/iPad
  • Customizable Touch Controls for mobile devices (iOS, Android)
  • Real Atari 2600 Console panel for a nostalgic feel!
  • Install as a WebApp, then run offline
  • Put Atari 2600 games in webpages easily
  • Show games running with a single link to the Javatari page
  • Drag & Drop system for loading files
  • Savestates support. Export and share Savestate files
  • Fully customizable Joysticks, Joykeys and Touch controllers
  • Adjustable speed, Pause and Frame-by-frame advance
  • Screen Capture and Debug modes
  • Resizable Screen, Full Screen mode
  • Javascript API for loading ROMs and Console control

Download: Javatari.js v4.0.1 (506)

source: javatari.org

Relaunch64 V3.3.7 – C64/65xx cross-development IDE

April 3rd, 2017 No comments

Relaunch64 is an IDE (text-editor) for C64 assembler-coding on Windows, Linux and Mac OS X. Relaunch64 has a clean and intuitive user interface, yet it offers many features that make coding faster and easier.

Java 7 or higher is required to run Relaunch64. The program is licensed under the GNU GPL 3 (or higher) and free for private and professional use.

This editor works together with common cross assemblers like Kick Assembler, ACME, or 64tass. Other assemblers might work as well, but syntax highlighting may not be 100% correct.

Download: Relaunch64 v3.3.7 (Windows/OSx/Linux) (409)

source: popelganda.de

CBM prg Studio v3.10.0 released

March 25th, 2017 No comments

CBM prg Studio Version 3.9.0 is released. There are a lot of new features in this version. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.

CBM prg Studio allows you to type a BASIC or Machine Code program in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 / VIC20 or PET if you’re feeling brave and have the right kit.

CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.

It was also a good opportunity for a face lift and to add some new features, such as:

  • Programs are project based, meaning all related source files, sprite files etc. are kept in one place and multiple source files can be linked more easily.
  • Tabbed MDI.
  • Syntax highlighting.

What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.

New features in v3.10.0:

  • Assembler:
    • Increased sprite include limit to 256.
    • ‘Memory overwrite’ error is now a warning.
    • Use CTRL+[ and CTRL+] to go to previous/next label definition.
  • Sprite Editor:
    • Added new functionality to scratchpad.
    • Functions can act over a range.
  • Character Editor:
    • Rotate character 90 degrees.
  • General:
    • Option to load last edited project automatically.

Bugs Fixed:

  • General:
    • Using space(s) with screen code builder.
    • Wrong menu after creating a project.
    • Occasionally throws an exception when closing and opening the project explorer, project information and output windows.
    • ‘User’ palette settings not saved/used.
    • ‘User’ tools menu not created properly.
    • Generate and launch could use wrong filename.
    • VIC 20 memory configuration not set properly in emulator.
    • Tabs with different zoom levels would crash when changing tabs.
  • Assembler:
    • Uppercase PETSCII chars not generated properly.
    • IncBin wrongly reporting file too large.
    • Floating point value 0.0 not generated correctly.
  • BASIC:
    • Renumber not working for certain uppercase keywords.
    • Character code multiplier limited to 255.
    • Compress should ignore comment lines.
  • SID Tool:
    • Incorrectly reporting that the tool was still open when quitting CBM prg Studio.

See the help for a complete list of new features and fixed bugs.

Note In this version, each target machine can have its own default project directory. If you are upgrading from a previous version (before version 2.5.1) of CBM prg Studio you may be asked to set up your project directories again. Your current projects will not be affected.

Download: CBM prg Studio v3.10.0 (452)

source: ajordison.co.uk