SDI 2.1.6 KEYS OVERVIEW [18.05.2013 11:59]
-------------------------------------------------------------------------------
All parameters you change and values you enter are hexidecimal.
Input keys: 0123456789ABCDEF


OVERALL KEYBOARD COMMANDS for SEQUENCER, TRACKER & SOUND EDITOR:
-------------------------------------------------------------------------------
<-              Fast forward play
CBM 1-4         Track on/off
F1              Play from mark (mark made with F2)
F2              Set play mark
F3              Stop/Continue play
F6              Tracker data on/off
F7/F8           Select octave (individual octaves for each track)
=               Play current line (press again to stop)
Z               Play song from current line
RUNSTOP         Sound Editor (Press again to exit)
/               Toggle Sequencer/Tracker & Sound editor edit on same screen
SH L            Load music
CBM S           Dump music
CBM +/-         Next/Previous song
?               Set speed calls
CBM Q           Quantize (0/2) for recording notes
CRSR            Left/Right/Up/Down


KEYBOARD COMMANDS FOR SEQUENCER AND TRACKER:
-------------------------------------------------------------------------------
F5              Toggle Tracker or Sequencer
CBM *           Set speed channels (place cursor on track)
H               Hunt for next unused sequence and replace it.
S/L             Tab jump left/right
V               View player counters/Full screen sequencer
SH CLRHOME      To start of song
SH S            Save Music
SH A            Increase cursor jump
CBM A           Decrease cursor jump
SH C            Copy sequence (whole sequence)
SH V            Paste into sequence (whole sequence)
SH D            Double sequence length
CBM C           Clone sequence and insert on next track line
CBM F           Fill sequence with empty lines (From cursor position)
CBM H           Hunt for next unused sequence - Insert it in the next track line
CBM I           Insert a track line
CBM K           Kill sequence/Unused/Make a sequence ready for use
M               Set start mark (grey background is marked area)
SH M            Set end mark
CBM M           Copy marked area to cursor position
:/[             Set track transpose
;/]             Set sequence number


KEYBOARD COMMANDS IN SEQUENCER:
-------------------------------------------------------------------------------
F4              Edit/Synth/Record mode (Grey/Blue/Red)
INSTDEL         Delete a line
SH INSTDEL      Insert a line
CLRHOME         Cycle Sequence Top/Middle/Bottom
SPACE           Delete down (depends on cursor jump)
SH SPACE        Delete up (depends on cursor jump)
SH X            Narrow sequence fom cursor pos. (remove every 2nd line)
CBM X           Expand sequnce from cursor pos. (place cursor on a odd line)
CBM RTYU        Set sequencer mark.
CBM 5678        Jump to sequencer mark.
,/.             Jump down/up 16 lines
>/<             Increase/Decrease notes from cursor position.
CBM RETURN      Start playing music from top of current sequence.
SH RETURN       Play and Loop music from top of current sequence.
RETURN          Play song from current line (same as Z)
N               Turn note to tie/normal
SH N            All marked notes turned to normal
CBM N           All marked notes turned to tie
G               Gate on (GAT in sequence)
SH G            Gate off (gat in sequence)

When entering notes in the sequencer you have 
2 octaves present at all times:
------------------------------
    1 2  4 5 6  8 9  + - 
CTRL Q WE R T YU I OP @ * UpArrow

Hold down SHIFT to get tie/attack notes.


TRACKER KEYBOARD COMMANDS:
-------------------------------------------------------------------------------
>               Increase transpose values or sequence values.
<               Increase transpose values or sequence values.
INSTDEL         Delete a track line
SH INSTDEL      Insert a track line
RETURN          Set loop mark for current channel
SH RETURN       Set stop mark for current channel
SH 1-3          Swap tracks (including all sub songs - music must be off)


SOUND/INSTRUMENT EDITOR KEYBOARD COMMANDS:
-------------------------------------------------------------------------------
N               Name sound/instrument (return to exit)
+/-             Select sound
SH +/-          Select sound with focus on displaying their programs
>/<             Select arpeggio number with focus on the arpeggio data.
SH A            Arpeggio program table
SH F            Filter program table
SH I            Initial volume and Filter channels/Filter speed table
SH P            Pulse program table
SH S            Sound setup table
SH T            Tempo program table
SH V            Vibrato program table
SH W            Waveform program table
M               Mark sound
SH M            Copy sound

When working with cursor inside the different programs:

RETURN          Put current program line into sound setup
                Only for waveform, pulse, filter and vibrato.
                (Return in tempo table will set default tempo for this song.)
SH RETURN       Delete program from sound setup.
                Only for waveform, pulse, filter and vibrato.
,/.             Jump 4 lines up/down
CLRHOME         Go to current sound's program line (if there's one).
                (For arpeggio it will display current arpeggio at top).
SH CLRHOME      Go to top of program line table
INSTDEL         Delete a program line. (not for sound setup table)
SH INSTDEL      Insert a program line. (not for sound setup table)


LOAD MENUE COMMANDS:
-------------------------------------------------------------------------------
SPACE          Read a new directory into memory
SH SPACE       Go to DOS command screen
*              Display files A-Z
SH *           Display files Z-A
A-Z            Set display path
CTRL 1-0       Select disk drive 11,12,13,14,15,16,17,8,9 and 10.
CRSR           Select music
RETURN         LOAD MUSIC
SH RETURN      CLEAR MEMORY or Load track+sequener data only.
,/.            Jump 8 files up/down
CLRHOME        Top of directory
SH CLRHOME     Bottom of directory
RUNSTOP        Exit

SAVE/DUMP COMMANDS:
-------------------------------------------------------------------------------
RunStop        Exit
Return         Save/Dump music
SPACE/InstDel  Delete text
Keyboard       Input text

DOS COMMANDS:
-------------------------------------------------------------------------------
Keyboard        Input text
CRSR            Move cursror around.
CLRHOME         Go to start of command line.
SH CLRHOME      Clear command line.
RETURN          Send disk command.
RunStop         Exit to load menue.

PC/EMULATOR USERS:
-------------------------------------------------------------------------------
Restore         Page Up
CTRL            Tab Key
RunStop         CapsLock / Escape
Return          Enter
CBM             CTRL
<-               (The key above the Tab key)
=               ' (They key above right shift and to the left of the enter key)
/               /_ (Can also be the underscore key)
?               ?_ (Can be the shift + underscore key)
CRSR            Arrow keys
*               ^}
ClrHome         Home
A#?             Insert
h-?             Delete
