# Hey Emacs, this is a -*- makefile -*-

#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Joerg Wunsch, et al.
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
#
#
# Extensively modified for sd2iec and later adapted for ARM by Ingo Korb
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------

# Read configuration file
ifdef CONFIG
 CONFIGSUFFIX = $(CONFIG:config%=%)
else
 CONFIG = config
 CONFIGSUFFIX =
endif

# Enable verbose compilation with "make V=1"
ifdef V
 Q :=
 E := @:
else
 Q := @
 E := @echo
endif

# Include the configuration file
include $(CONFIG)

# Directory for all generated files
OBJDIR := obj$(CONFIGSUFFIX)

# Output format. (can be srec, ihex, binary)
FORMAT = binary

# Linker script
LINKERSCRIPT = lpc1754boot.ld

# Target file name (without extension).
TARGET = $(OBJDIR)/sd2snes_bootldr


# List C source files here. (C dependencies are automatically generated.)
SRC = timer.c main.c ff.c clock.c uart.c power.c led.c faulthandler.c crc32.c sdnative.c fileops.c iap.c printf.c 

# usbcontrol.c usb_hid.c usbhw_lpc.c usbinit.c usbstdreq.c


# List Assembler source files here.
#     Make them always end in a capital .S.  Files ending in a lowercase .s
#     will not be considered source files but generated files (assembler
#     output from the compiler), and will be deleted upon "make clean"!
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
#     it will preserve the spelling of the filenames, and gcc itself does
#     care about how the name is spelled on its command-line.
ASRC = startup.S crc.S


# Optimization level, can be [0, 1, 2, 3, s].
#     0 = turn off optimization. s = optimize for size.
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
#OPT = 2
OPT = s

# Debugging format.
DEBUG = dwarf-2


# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
#     Use forward slashes for directory separators.
#     For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS =


# Compiler flag to set the C Standard level.
#     c89   = "ANSI" C
#     gnu89 = c89 plus GCC extensions
#     c99   = ISO C99 standard (not yet fully implemented)
#     gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99


# Place -D or -U options here
CDEFS = -DF_OSC=$(CONFIG_MCU_FOSC)UL


# Place -I options here
CINCS =


# CPU-specific flags
ifndef CPUFLAGS
  CPUFLAGS := -mthumb -mcpu=cortex-m3
endif

ifndef ARCH
  ARCH := arm-none-eabi
endif

# Define programs and commands.
# CC must be defined here to generate the correct CFLAGS
SHELL = sh
CC = $(ARCH)-gcc
OBJCOPY = $(ARCH)-objcopy
OBJDUMP = $(ARCH)-objdump
SIZE = $(ARCH)-size
NM = $(ARCH)-nm
REMOVE = rm -f
COPY = cp
AWK = awk


#---------------- Compiler Options ----------------
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += $(CPUFLAGS) -nostartfiles
#CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes -Werror
CFLAGS += -Wa,-adhlns=$(OBJDIR)/$(<:.c=.lst)
CFLAGS += -I$(OBJDIR)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -ffunction-sections -fdata-sections


#---------------- Assembler Options ----------------
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
ASFLAGS = $(CPUFLAGS) -Wa,-adhlns=$(OBJDIR)/$(<:.S=.lst),-gstabs -I$(OBJDIR)


#---------------- Linker Options ----------------
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -T$(LINKERSCRIPT)
LDFLAGS += -Wl,--gc-sections
ifeq ($(CONFIG_LINKER_RELAX),y)
  LDFLAGS += -Wl,-O9,--relax
endif


#============================================================================


# De-dupe the list of C source files
CSRC := $(sort $(SRC))

# Define all object files.
OBJ := $(patsubst %,$(OBJDIR)/%,$(CSRC:.c=.o) $(ASRC:.S=.o))

# Define all listing files.
LST := $(patsubst %,$(OBJDIR)/%,$(CSRC:.c=.lst) $(ASRC:.S=.lst))


# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d


# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -I. -x assembler-with-cpp $(ASFLAGS) $(CDEFS)





# Default target.
all: build

build: elf bin hex
	$(E) "  SIZE   $(TARGET).elf"
	$(Q)$(ELFSIZE)|grep -v debug

elf: $(TARGET).elf
bin: $(TARGET).bin
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym

# # A little helper target for the maintainer =)
# copy2card:
#	cp $(TARGET).bin /mbed/hw_LPC1768.bin


#	utils/lpcchksum $(TARGET).bin
fresh: erase program

program: bin
	openocd -f openocd-usb.cfg -f lpc1754.cfg -f flash.cfg

debug: bin
	openocd -f openocd-usb.cfg -f lpc1754.cfg

reset:
	openocd -f openocd-usb.cfg -f lpc1754.cfg -f reset.cfg

erase:
	openocd -f openocd-usb.cfg -f lpc1754.cfg -f erase.cfg

# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf



# Generate autoconf.h from config
.PRECIOUS : $(OBJDIR)/autoconf.h
$(OBJDIR)/autoconf.h: $(CONFIG) | $(OBJDIR)
	$(E) "  CONF2H $(CONFIG)"
	$(Q)$(AWK) -f conf2h.awk $(CONFIG) > $(OBJDIR)/autoconf.h

# Create final output files from ELF output file.
$(OBJDIR)/%.bin: $(OBJDIR)/%.elf
	$(E) "  BIN    $@"
	$(Q)$(OBJCOPY) -O binary $< $@
	../utils/lpcchksum $@

$(OBJDIR)/%.hex: $(OBJDIR)/%.elf
	$(E) "  HEX    $@"
	$(Q)$(OBJCOPY) -O $(FORMAT) $< $@

# Create extended listing file from ELF output file.
$(OBJDIR)/%.lss: $(OBJDIR)/%.elf
	$(E) "  LSS    $<"
	$(Q)$(OBJDUMP) -h -S $< > $@

# Create a symbol table from ELF output file.
$(OBJDIR)/%.sym: $(OBJDIR)/%.elf
	$(E) "  SYM    $<"
	$(E)$(NM) -n $< > $@


# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
$(TARGET).elf : $(OBJ)
	$(E) "  LINK   $@"
	$(Q)$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)


# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c | $(OBJDIR) $(OBJDIR)/autoconf.h
	$(E) "  CC     $<"
	$(Q)$(CC) -c $(ALL_CFLAGS) $< -o $@


# Compile: create assembler files from C source files.
$(OBJDIR)/%.s : %.c | $(OBJDIR) $(OBJDIR)/autoconf.h
	$(CC) -S $(ALL_CFLAGS) $< -o $@


# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S | $(OBJDIR) $(OBJDIR)/autoconf.h
	$(E) "  AS     $<"
	$(Q)$(CC) -c $(ALL_ASFLAGS) $< -o $@

# Create preprocessed source for use in sending a bug report.
$(OBJDIR)/%.i : %.c | $(OBJDIR) $(OBJDIR)/autoconf.h
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

# Create the output directory
$(OBJDIR) :
	$(E) "  MKDIR  $(OBJDIR)"
	$(Q)mkdir $(OBJDIR)

# Target: clean project.
clean: begin clean_list end

clean_list :
	$(E) "  CLEAN"
	$(Q)$(REMOVE) $(TARGET).hex
	$(Q)$(REMOVE) $(TARGET).bin
	$(Q)$(REMOVE) $(TARGET).elf
	$(Q)$(REMOVE) $(TARGET).map
	$(Q)$(REMOVE) $(TARGET).sym
	$(Q)$(REMOVE) $(TARGET).lss
	$(Q)$(REMOVE) $(OBJ)
	$(Q)$(REMOVE) $(OBJDIR)/autoconf.h
	$(Q)$(REMOVE) $(OBJDIR)/*.bin
	$(Q)$(REMOVE) $(LST)
	$(Q)$(REMOVE) $(CSRC:.c=.s)
	$(Q)$(REMOVE) $(CSRC:.c=.d)
	$(Q)$(REMOVE) .dep/*
	-$(Q)rmdir $(OBJDIR)

# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter \
build elf hex lss sym clean clean_list
