This update fixes issues with some consoles (heavy sixers) that would not run previously run the Uno firmware.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 17 in the menu.

This update fixes support for 3E+ cartridges with more than 16k of RAM.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 16 in the menu.

This update adds support for 4KSC (4K + superchip RAM) banking.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 15 in the menu.

This update adds support für 3E+ banking, thanks to Wolfgang Stubig (AlNafuur on AAge).

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 14 in the menu.

This build contains several changes to DPC emulation that should improve the compatibility with consoles that have weird bus timings.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 13 in the menu.

This build fixes a timing regression in DPC emulation that crept into the recent releases and can cause Pitfall II to crash. In addition, DPC audio quality is improved.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 12 in the menu.

This fixes an issue with supercharger games that crept into v10 and v09 due to a switch of toolchain.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 11 in the menu.

This fixes ROMs that fail to autodetect with v09.

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 10 in the menu.

Initial release on github. Previous releases are available on AtariAge and in the firmware/Previous Versions directory.

• Support for the Pink Panther Prototype
• Support for BF / BFSC
• Support for DF / DFSC

Installation:

Download update.bin to your SD card and launch the update from the menu. Don't switch off your 2600 until the screen says "UPDATE COMPLETE".

If you have a ST-LINK/V2 programmer, you can also flash firmware.bin / firmware.hex directly.

This release identifies as R.EDWARDS 9 in the menu.