SDCard HxC Floppy Emulator Manager for Amiga

Requirement:
- An Amiga computer (tested on Amiga 500 & 600)
- A SDCard HxC Floppy Emulator Rev B or C with the firmware version V1.3.0.3 or above.


To use it you need :
copy/replace HXCSDFE.CFG to your sdcard.
copy AUTOBOOT.HFE to your sdcard.
(Note: it is recommended to copy these 2 files right after having formatted the SDCard)
If your emulator is set as DF0 you must use AUTOBOOT.HFE present in the Emulator_as_DF0 folder.
If your emulator is set as DF1 you must use AUTOBOOT.HFE present in the Emulator_as_DF1 folder.


After this the new SDCard HxC Floppy Emulator buttons behaviour are:

Right button : Next Slot
Center button : Slot 0 - SDCard HxC Floppy Emulator Manager floppy image.
Left button  : Previous Slot

Jeff / HxC2001
10/10/2011 



