Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports:

Release notes Firmware USB HxCFloppyEmulator v3.0.6.2a

• Normal mode : Endless init loop corrected.

Release notes Firmware USB HxCFloppyEmulator v3.0.6.1a

• Amiga : Disk change detection corrected : Desert Strike, Dizzy Crystal and probably others games disk change detection are now working properly.
• Direct access mode : Correct interface mode set when activated from an PC HD image.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.2a (1276)

source: hxc2001.com

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports:

Release notes Firmware USB HxCFloppyEmulator v3.0.6.0a

• Low level write layer redesigned : Some write issues solved.
• 2 digits display detection issue corrected.
• HFE : Index timing changed/corrected.
• Select button added at the JA jumper position.
  • This additionnal button and the I2C LCD screen allow you to freely select a file image without the indexed mode or any selector software.
• Indexed mode : “Previous”/”Minus” button repeat rate reduced.

Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.0a (1194)

source: hxc2001.com

Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.

Download: SD2Snes Firmware v0.1.7 Beta/Preview Rev 4 (1597)

Full Changelog:

• Prevent software from using uninitialized DMA ch.0 transfer to corrupt the stack (fixes Nightmare Busters)
• Disable PPU region patching during the menu
• MSU1: Stop audio playback on reset (fixes static buzzing noise in games after soft-resetting out of an MSU1 game)
• Cx4: Add a switch for original/fast mode. “Original” mimics the Cx4 timing better (Megaman doesn’t die in MMX2 attract mode) whereas “Fast” uses a single CPU cycle for every instruction, improving frame rate when drawing polygons (rotating head in MMX2 intro).
• Hide dot files and directories again (Regression in 0.1.7).
• “Stealth Mode” for in-game hook memory area hides the memory region used by in-game routines from games. (Fixes Equinox, Lion King)
• In-game hooks are a bit less intrusive in terms of CPU time, hopefully reducing glitches a bit with problematic games.
• System Information screen shows file system usage on card.
• Slow down DSPx a bit to better match original speed (should have no noticeable effect)
• Font height is reduced by one pixel to increase readability (lines of text are more distinguishable). This has an effect on the font style so some might not like it…?
• Background is greyed out when a window is active in foreground
• Menu now uses the dynamic hierarchical menu system, with automatic calculation of window dimensions, etc. Not much of it can be seen at the moment due to the lack of menu entries.
• Experimental SRAM mapping for Cx4
• FPGA: adjust address sampling time for “end-of-cycle” events. Should help primarily with DSP1 glitches.
• MSU1: initial volume now adheres to the latest spec (initial volume = 0) so it must be initialized by software to the desired level. This actually breaks my own example player I will post an updated version of it shortly.

Read more…