Public FTP with a tons of Commodore 64 games and more!
source: arnold.c64.org
source: arnold.c64.org
From the Homepage.
ROM-el ROM Eliminator: Another project of mine requires a way to replace the 2364 ROMs on Commodore computers, so I started looking for a 2764 to 2364 adapter.
After designing one, I determined that DIP EPROMs are starting to get very expensive, so I set about designing a Flash version. My tentative name is ROM-el. Since Flash is considered ROM as well, the name is a bit off, but I liked it, and only the pedantic will probably care.
64Nic: 2 64NIC+ boards arrived on April 20, and I assembled one in the evening. Initial testing with Devia’s NIC-Test was unsuccessful, so I gave up for the night. After work on the 21st, I pored over the schematics and determined I had miscopied a resistor layout from Eric Pratt’s 64NIC design. The resistor must be tied to ground, not Vcc. Dubious that such a small change would make the board work, I nonetheless made the change and …. it did nothing.
I decided I’d ruined one board, so I assembled the second board, taking care to make the resistor mod before plugging it in. Devia’s NIC-Test worked immediately. Later, I tried the apparently ruined board and it also worked, so it appears I did not completely ruin the board.
Given the success, I immediately released the board to production that evening.
source: jbrain.com
After this update, the collection should contain 36,000 SID files!
This update features (all approximates):
source: hvsc.c64.org
from Engadget: Look: there are purses, and then there are purses. Well, this one is none of those things. It’s a decent looking bag to begin with, but then… well, things get really fantastic.
Jeri Ellsworth took it upon herself to cram a Nintendo-on-a-chip and a Commodore 64-on-a-chip (her own creation) into the bag, along with an LCD. Then she connected up some NES controllers, which are velcroed onto the outside of the bag. The result looks awesome, and is also actually useable.
We haven’t heard anything about these guys being offered for sale, but we’re fairly certain that the august House of Dior will probably be ringing her up any day now. Seriously: this thing is a work of art.
source: engadget.com
ULoad is a loader system I developed for my Ultima gold cracks. This is a cleaned up version of the loader I developed for Ultima 3 Gold, which is a relatively basic 2-bit timed IRQ file loader.
It also allows you to save files, although it’s limited to overwriting existing files and cannot create new files. It supports a wide range of IEC drives, of course works on both PAL and NTSC, and also supports SuperCPU and DTV2 running in turbo mode.
source: paradroid.net/uload
TapPlay / TAP file playback for sd2iec hardware.
source: sd2iec.de gitweb forum thread twitter.com
C64 Demo Competition Results :
This game is a conversion for the Commodore C64. The original was made for the Vectrex Console in 1982.
The Commodore C64 version is written by Benson and Peiselulli of Trsistar and Red Sector Incorporated, the C00l music is made by Linus.
source: noname.c64.org
Benjamin J. Heckendorn made a laptop of a Commodore C64. He used a modified C64c motherboard, original keyboard, 15″ TFT screen and a 1541-III DTV.
Ben also made the case for the laptop. The most work was to get the C64 motherboard and keyboard fit inside the laptop.
source: commodore-gg.hobby.nl benheck.com
A small PNG to C64 multicolor bitmap converter By Mix256. Creates a C64 runnable prg file from a 320x200x4 png file.
source: noname.c64.org
source: papposoft web noname.c64.org
This version of the game has some changes and bug fixed.
Changes:
Some old pixels art from Carrion on Flickr.
source: carrionpixels.wordpress.com
from Loriano Page:
After designing the case for the Minimig, some 1541 Ultimate users asked me to take on the rather difficult project of making a case for Gideon’s 1541 Ultimate board.
There have been a few different production runs of the 1541 ultimate boards. The case has been designed around and tested with batch 2 and batch 3 boards. I have also tested the case with one batch 4 and it fits nicely. Batch 1 is shorter than the more recent batch 2, 3 and 4, and does not fit in the case. A case just for batch 1 is in the works.
A lot of time, effort and money have gone in designing this case. I have tried to accommodate batch 2, batch 3 and batch 4 boards, their very subtle differences, boards with and without the Ethernet port and tried to make it work with both Commodore 64 models (classic and 64C) and at the same time include some of the users’ requests.
source: Loriano Pagni Homepage Order Page
Recent Comments