Archive

Archive for the ‘Today’ Category

December 12th, 2017 Comments off

December 7th, 2017 Comments off
Categories: Hardware, News & Rumors, Today

December 4th, 2017 Comments off

December 4th, 2017 Comments off

November 30th, 2017 2 comments

November 22nd, 2017 1 comment

November 22nd, 2017 3 comments

November 20th, 2017 Comments off
Categories: Event(s), News & Rumors, Today

November 20th, 2017 Comments off
Categories: Event(s), News & Rumors, Today

November 17th, 2017 2 comments

November 8th, 2017 2 comments
Categories: Event(s), News & Rumors, Today

Acetronic (Radofin 1292) MPU-1000 Composite MOD

November 8th, 2017 5 comments
Acetronic (Radofin 1292) MPU-1000 Composite MOD

This Video Composite MOD needs some work unlike other similar consoles, you need to remove a resistor and insert a trimmer, otherwise the Video Composite output signal is really bad.

Works that need to be done:

  • Remove the RF Modulator (remove it completely)
  • Remove the 4.7k Resitor (see photo)
  • Solder a 22k Trimmer between the resistor hole (hole side to pin 8 of the TEA 1002/PE1X) and the ground, the third pin of the trimmer is the Video Composite output. (see photo)
  • Solder a wire for the Audio output. (see photo)
  • Use the same hole of the RF cable for the new video and audio cable.

Before closing everything i recommend to adjust the trimmer for the best Video output.

Gallery of the Video Composite MOD:

Gotek HXC Alpha Firmware with OLED Display

November 2nd, 2017 No comments
Gotek HXC Alpha Firmware OLED Display

Gotek HXC Alpha Firmware with OLED Display.

You can download here the Alpha Firmware Update.

Gallery:

source: hxc2001.com

Categories: Firmware, News & Rumors, Today

Commodore Amiga CDROM A570 Restoration

November 2nd, 2017 5 comments
Commodore Amiga CDROM A570 Restoration

Commodore Amiga A570 Restoration.

I have received two retro things in very bad conditions.

  • 1 x Floppy Drive CD-1411
  • 1 x Commodore Amiga CDROM A570

… but for now we are talking about the Commodore A570.

The Commodore A570 have serious problems that i list below:

  • Outside case is very dirty, yellowed and broken in several parts.
  • The Caddy Guide Tracks has been destroyed.
  • Damaged screws thread.
  • The metal plate under the CDROM is bent on one side.
  • Many rusty parts.
  • Main PCB with traces of water/limestone and rust.

Works that have been made:

  • Fixed the CDROM CADDY holder, it was not easy because all the metal guides are bent, now it works.
  • Main PCB cleaning on both sides with the Kontakt PCC and toothbrush.
  • Cleaned and grease the two rails of the laser head.
  • Cleaned the head lens of the CDROM.
  • Fixed the bent metal plate under the CDROM.
  • Cleaning outer casing.
  • Fixed with the glue the two pins for closing the case with the screws.

Work still to be done:

  • The bottom part of the A570 CDROM is very rusty, i need to sand down gently and at least give a hand of anti rust.

Aesthetically is very bad but at least works.

Gallery of the restoration:

Video:

Categories: Projects / Repairs, Today

November 2nd, 2017 Comments off