My SIO2SD interface is dead (without any valid reason) after 2-3 hours of playing demos/games.

I have tried to reprogramming the firmware with a STK500 USB ISP Programmer and the tools AVRDUDE and it has worked perfectly.

The functions keys (Start / Option / Select / Reset..) of my Atari 130 XE not making good contact, i have fixed this problem with a good clean-up and graphite of a pencil.

This is a Joystick Adapter for Apple IIc, with this adapter you can use the Apple ][ Plus Joystick.

Joystick Adapter Pinouts:

12►

Some fixes for the Electron Data Recorder ALF03.

• Fixed the output Audio.
• Replace the belt.
• Clean the tape head and fix the Azimuth.
• Fixed the Powersupply cable.
• Self made RGB Cable.
• Self made Data Recorder Cable (DIN 7 PINs).

Click here for my Acorn Electron computer.

Autopsy:

This is my homebrew C2N232 Interface.

from Marko Mäkelä’s homepage:

The C2N232 is a small RS-232 interface that can be plugged to the cassette port of an 8-bit Commodore computer:

• PET series: 2001, 3000 series, 4000 series, 8000 series, 200 series
• PET-II series: CBM 500, 600 or 700 series (P500 or the B series)
• Commodore VC-20, VIC-20 or VIC-1001
• Commodore 64, 4064, 64c or 64G
• Commodore 128, 128D or 128DCR
• Commodore 264 series: 16, 116, plus/4 or 232

source: Marko Mäkelä’s Homepage

My homebrew Powersupply adaptor for Amstrad CPC 6128 with a External Floppy Drive 3½.

source: cpcwiki.eu jrp king homepage kjthacker.f2s.com

Parados Installation Photo Gallery:

ParaDOS is 16kB ROM that replaces the AmsDOS. Allows to use double-sided floppy disks and some more disk formats.

source: grimware.org

Foto review of the Serial cable and Transfer program:

ADTPro may be used to transfer Apple diskette/disk images in DOS or ProDOS/SOS format.

The Apple client side happens to run under ProDOS or SOS, but it is perfectly capable of reading or writing Apple DOS (or Pascal, or CP/M, or…) diskettes.

source: adtpro.sourceforge.net

My homebrew Powersupply adaptor & RGB/Audio Scart cable for Amstrad CPC 464/6128.

source: cpcwiki.eu jrp king homepage kjthacker.f2s.com

I have bricked my fonera and now the power light comes on but the fonera reboot cycling. I cannot access the web gui /ssh or telnet through redboot. Serial Connection fix all  my problems.

Gallery:

source: dd-wrt.com

Replacement the Sinclair QL membrane and reassemble the Keyboard.

source: rwapsoftware.co.uk

I’m the creator of the SID 6581<>8580 Switcher (here the original project).

I’m Very happy to see my project on the net. Arkanoid (a user of Lemon64 Forum) has done a very nice PCB with some fixes. Very nice job.

This is not a SId2Sid Clone.

source: lemon64.com

Autopsy:

The PLA chip (906114-01) used in the Commodore C64 is a generic 82S100 gate array with custom programming.

Its logic functions were dumped and reverse engineered by the community and are available from a variety of sources. This PLA uses the Xilinx CPLD XC9536 to emulate perfectly the PLA of the Commodore 64.

Download: Xilinx CPLD XC9536 JED C64 PLA + Eagle (2378)

source: zonadepruebas.com

Some Screenshots :

source: atari-forum.com

Teac Floppy Drive and some games Screenshots:

source: atari4ever