My homebrew Powersupply adaptor for Amstrad CPC 6128 with a External Floppy Drive 3½.

source: cpcwiki.eu jrp king homepage kjthacker.f2s.com

Parados Installation Photo Gallery:

ParaDOS is 16kB ROM that replaces the AmsDOS. Allows to use double-sided floppy disks and some more disk formats.

source: grimware.org

Foto review of the Serial cable and Transfer program:

ADTPro may be used to transfer Apple diskette/disk images in DOS or ProDOS/SOS format.

The Apple client side happens to run under ProDOS or SOS, but it is perfectly capable of reading or writing Apple DOS (or Pascal, or CP/M, or…) diskettes.

source: adtpro.sourceforge.net

My homebrew Powersupply adaptor & RGB/Audio Scart cable for Amstrad CPC 464/6128.

source: cpcwiki.eu jrp king homepage kjthacker.f2s.com

I have bricked my fonera and now the power light comes on but the fonera reboot cycling. I cannot access the web gui /ssh or telnet through redboot. Serial Connection fix all  my problems.

Gallery:

source: dd-wrt.com

Replacement the Sinclair QL membrane and reassemble the Keyboard.

source: rwapsoftware.co.uk

I’m the creator of the SID 6581<>8580 Switcher (here the original project).

I’m Very happy to see my project on the net. Arkanoid (a user of Lemon64 Forum) has done a very nice PCB with some fixes. Very nice job.

This is not a SId2Sid Clone.

source: lemon64.com

Autopsy:

The PLA chip (906114-01) used in the Commodore C64 is a generic 82S100 gate array with custom programming.

Its logic functions were dumped and reverse engineered by the community and are available from a variety of sources. This PLA uses the Xilinx CPLD XC9536 to emulate perfectly the PLA of the Commodore 64.

Download: Xilinx CPLD XC9536 JED C64 PLA + Eagle (2343)

source: zonadepruebas.com

Some Screenshots :

source: atari-forum.com

Teac Floppy Drive and some games Screenshots:

source: atari4ever

• PIN 1 = Common (GND)
• PIN 4 = Free
• PIN 2 = 14.6v (AC)
• PIN 5 = Free
• PIN 3 = 14.6v (AC)

Click here for my Commodore Modem 8010.

Sound fix diagram here. (pdf)

from Cristian Secară Homepage:

The first release (the +3) has a fatal hardware mistake: the 128K sound output is completely distorted.

• Tech explanation: the analog output of the AY-3-8912 sound chip was intended to be amplified by a one stage common-emitter transistor. In practice, they have forgot to put a resistor to the transistor’s emitter. The result: the transistor works in switch-mode – the sound is converted from analog multi-level amplitude to digitized two-level amplitude, same as the old 48K sound system.

source: secarica.ro ay8912 Demos

ColecoVision RGB Hack:

Photo from #3 to #6 explain how to hack the RGB output signal inside the console.

ColecoVision RGB connector pinout:

__________________________________
\ o1  o   o3  o   o5  o   o   o8 /
 \  o   o   o   o   o13 o   o15 /
  \____________________________/

Pin Signal

 1  Red Output
 3  Green Output
 5  Blue Output
 8  Ground
13  Composite Synch
15  Audio Output (very low volume)

Scart RGB pinout:

   ----------------------------21
  _| 19 17 15 13 11 9 7 5 3 1 |
 |                            |
 | 20 18 16 14 12 10 8 6 4 2  |
  ----------------------------

Pin Signal                     Signal level

 1  Right Audio Out
 2  Right Audio In
 3  Left Audio In
 4  Audio Ground
 5  Ground (blue)
 6  Left Audio Out
 7  Blue input                 (0.7V, 75ohm)
 8  Function select/AV control (9.5-12V = AV mode, >10kohm)
 9  Ground (green)
10  Reserved Data
11  Green input                (0.7V, 75ohm)
12  Reserved Data
13  Ground (red)
14  RGB Blanking
15  Red input                  (0.7V, 75ohm)
16  RGB switching control      (1-3V = RGB mode on, 75ohm)
17  Ground (sync signal)
18  Ground (RGB switching)
19  Composite Out
20  Composite Input (Synch)    (as in 1Vpp video signal, 75ohm)
21  Common ground (shield)

Fix:

• Video Contrast problems: i have bypassed the resistor for RGB. (Photo #6)
• Jamma Connector is too big for my SNK MV-2F MVS: I have used a rasp for reduce the Jamma connector. (Photo #7)

source: wikipedia

Autopsy:

1234►

Description:

• Country: USA
• Most Common: USA/Europe
• Rarity: Very rare
• Year: 1983
• Price: $995

Fix/Enhancement:

• Added a Fan.
• ASSY fix from Commodore.
• I/O Fastloader fix.
• Userport GND  fix.
• Jiffy Kernel (C64/1541).

from Wikipedia:

The Commodore SX-64, also known as the Executive 64, or VIP-64 in Europe, was a portable, briefcase/suitcase-size “luggable” version of the popular Commodore 64 home computer and holds the distinction of being the first full-color portable computer.

The SX-64 featured a built-in five-inch composite monitor and a built-in 1541 floppy drive. It weighed 23 lb (10.5 kg). The machine was carried by its sturdy handle, which doubled as an adjustable stand. It was announced in January 1983 and released a year later, at $995.

source: Wikipedia Oldcomputers