Autopsy:

I have to thank my friend Damiano for sending me the ITS Module with a low serial number, which like the previous one (C64SD v2.0) i really appreciate it.

The ITS module is a interface that enables SD2IEC to play .TAP files version 1 and version 2 to a commodore machine. The ITS module was designed to fit into the pass-through tape connector of C64SD Infinity and to be connected to the C64SD by a four wires cable that allows C64SD to manage it.

SD2IEC firmware has been modified in order to add the commands and the routines needed to control the external ITS module without removing any of the original SD2IEC functionalities

Features:

• Play back any V1 or V2 standard .TAP files in order to load them into a commodore machine belonging to the “classic” or “264” series including: VIC-20, VC20, C64, C16, C116, C128 (all
• versions) and Plus/4. Note: some models of C128D doesn’t have the tape edge-card connector, of  course ITS is not compatible with these machines.
• Rebuild the original tape grabbed into all the .TAP version 1 and for most of the version 2
• Work permanently connected between the tape port of the commodore computers and the corresponding datassette (either 1530 white model flat plug or 1531 black model mini-din plug) acting
• As a pass-through transparent gateway or activated in order to play back .TAP files: no need to connect and disconnect the module to use your datassette.
• Play back .TAP content with optimal accuracy and completely in digital format without the hassle of file conversions or level adjustment
• Simulate tape motor activation logic fully so that the play back of the tape is managed as it would be in a real C2N tape. An override button has been provided able to stop the play back of the “virtual tape” at any time when necessary.
• Work with either 1530 (White model, flat plug) datassette recorder as well as with 1531 (Black, mini-din plug) datassette
• Load .TAP with multiple programs recorded one after the other (like the classic tape compilations sold in the 80′s)  

What Can’t You Do:

• Create a .TAP file representing the content of a Tape (i.e. ITS is not a “tape content grabber”)
• Fix the content of a TAP file in case it’s broken. Broken .TAP won’t load on your Commodore box. Since there are literally thousands of utilities to create and manipulate .TAP files there is the possibility to come across non-standard or incorrect .TAP files.
• Play back the content of .TAP of version V0. Use an utility to convert V0 .TAP files to V1 such as TapClean then you will be able to use the converted .TAP file with ITS module.
• Manage programs saved on tape that are based on the tape-counter management or on the time of wind-rewind of the tape.

The ITS Module can be purchased on the Manosoft site.

ITS Tape Loading video:

source: manosoft.it

Gallery:

This is the preview of the Manosoft C64SD Infinity v2.0 Blue version. This version will be soon available for sale.

Here the full review of the Manosoft C64SD Infinity v2.0.

source: manosoft.it

Autopsy:

Preview of the new Manosoft C64SD Infinity v2.0.

This project is interesting not only because it’s another mass-storage solution but because it combines already existing solutions to a new and fresh product. Damiano has always followed all the Commdore related websites and forums especially concerning the MMC and SD2IEC projects.

That’s when he got the idea to build a solution for which one doesn’t need soldering, wire cutting or the IEC cable. C64SD utilizes the Datasette pass-through connector to power the SD2IEC circuit. An IEC pass-through connector connects right into the IEC port.

The whole module stand vertical along the back of the C64/128 (or VIC20). The module is fitted with two rather large buttons, one reset and one diskswap/multi-function button.

Remember: with a external power supply the C64SD works fine with Commodore 16/Plus4.

C64SD Infinity new Features:

• TAPE pass-through connector.
• Reset on User Port.
• CPU Type ATMEL ATmega 1284P(128k)
• SD Filesystem for firmware upgrade FAT16/32
• Standard Commodore 128 IEC Cable.

The interface can be purchased on the Manosoft site.

source: manosoft.it youtube.com