The Commodore Monitor 1960 may have been made by Daewoo (Korea) or a Taiwan company, or may be an OEMed Panasonic Panasync. The tube is made by Hitachi/Panasonic.

There has been some debate over whether it is a true multisync or a trisync monitor. Reports have been provided that indicate it can handle Super72 screen modes at about 23 kHz, and the manual says it can sync up to 38 kHz. It may be a sort of hybrid, with a wide “window” in the 15.75 kHz to 31.5 kHz range.

Gallery:

Download: Commodore 1960 Service Manual (1447)

source: bigbookofamigahardware.com

Apple Computer 1, also known later as the Apple I, or Apple-1, was released by the Apple Computer Company (now Apple Inc.) in 1976. It was designed and hand-built by Steve Wozniak. Wozniak’s friend Steve Jobs had the idea of selling the computer.

The Apple I was Apple’s first product, and to finance its creation, Jobs sold his only means of transportation, a VW Microbus, and Wozniak sold his HP-65 calculator for $500. It was demonstrated in July 1976 at the Homebrew Computer Club in Palo Alto, California.

—————————————————————————————————————————————————

Apple 1 (Mimeo / Mike Willegal Clone) Assembled for a friend of mine; Paolo Cognetti.

Many thanks for the Technical & Moral support to: Piero Todorovich and Alessandro Polito.
I also thank for some electronic components: Gabriele Molesto Zaverio of Museo Dell’informatica Funzionante, Piero Todorovich.

I had several problems with this Apple 1 clone, i very briefly describe the problems below and i attach some photos of the assembling stages.

• 1 – No video image, all voltages are ok.
• 1 + MPS3704 Transistor failure replaced with a 2N3704 pinout not compatible.

• 2 – Garbage screen during boot.
• 2 + Replaced 2 of 7 Shift Register 2504V

• 3 – Keyboard inputs not working, the WOZ monitor is freezed and shows an “@ \” but the “\” does not wrap.
• 3 + Replaced a 27k resistor half broken, probably during transport the capacitor has crushed the resistor.

• 4 – The keyboard does not respond correctly, typing A they print @, typing 1 they print 0 … and so on …
• 4 + Keyboard adapter from Apple II/+ to Apple 1 in short circuit. A wire is skewered in a pin of a Socket.

• 5 – The computer does not respond correctly, but it seems to work. The WOZ monitor responds to commands but does not write to memory and print random locations.
• 5 + Replaced a 7410 which had a pin always at high level.

• 6 – The keyboard has several problems, some switches are completly dead.
• 6 + Replaced switches.

Photos of the assembling stages:

123►

Video: