The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Changelog SD HxCFloppyEmulator v1.8.2.30 (fat) & v2.1.2.30 (slim):
- SDCard Support : Delay added right after any command (PNY microSD support).
- Watchdog delay changed to 16s.
- Brownout reset setting changed.
Download:
source: hxc2001.free.fr
Autopsy:
The Genius PC is a home computer from VTech. Released in the late 90s, it is one of the last microcomputers.
This computer have different names in each country, making it even harder to track down the information.
- France : VTech Genius PC
- Germany : VTech Genius IQ 128 and VTech TV 512
- UK : VTech IT Unlimited
- USA : VTech Precomputer Unlimited
- Also mentioned on the french packaging : Switzerland, the Netherlands, Canada.
Hardware:
- Motorola MC68EC000, 16-bit external databus, 32MHz
- 256K of RAM
- 2M of ROM – Sharp LH537NWN mask ROM
- Mass storage : 128KB flash memory – AM29F010
- Cartridge port, apparently on memory bus with system ROM and storage flash. The french system comes with cartridges only containing straps, likely shorting some pins enable extra features…
Downlod: VTECH Unlimited Manual (1673)
Hardware Video Review:
source: pulkomandy.tk/projects/avrstuff/wiki/geniuspc
This program works as a program launcher for Commodore machines. Even if it was originally intended for a device with sd2iec firmware, it works also with any CBM drive (without sd2iec functions of course).
It is a multi-system version derived from the discontinued sd2brwse v.0.6 by Hannu Nuotio (fork() of sdbrowse v.0.7)
The Vic-20 Mega-Cart Installer is based on sys.asm sources of mega-tools by Daniel Kahlin, sort routine by Michael Kircher.
Current supported machines:
- C64.
- C64DTV.
- Vic-20 unexpanded.
- Vic-20 +3K RAM.
- Vic-20 +8K RAM or plus (for FE3 use this version)
- Vic-20 with Mega-Cart.
- C16 / C116 / Plus4.
- C128 in 64 mode.
- C128 80 Columns.
Tested drives:
- MMC2IEC
- SD2IEC
- uIEC
- C64-SD (any version, with ITS modules too)
- 1541 (with JiffyDOS too)
- 1541-II
- 1571
- 1581
Changelog:
- v.0.1 – 01-Sep-2009 (Start of project, C64/C64DTV only)
- v.0.2 – 21-Oct-2009 (First working version for Vic-20 +8K RAM)
- v.0.3 – 06-Jan-2010 (Added memory config auto-detection for Vic-20 selected program)
- v.0.4 – 19-Jan-2010 (Added support for Vic-20 with Mega-Cart and manual start mode)
- v.0.5 – 10-Feb-2010 (Added support for Vic-20 unexpanded and Vic-20 +3K RAM)
- v.1.0 – 05-Mar-2010 (First public version, minor issues fixed, C64 and Vic-20 supported)
- v.1.1 – 22-Jun-2010 (Added support for D41 and DNP file images, sd2iec firmware v.0.9.0 or higher required)
- v.1.2 – 09-Oct-2010 (Added SJLOAD speed-up option to the manual mode of the Mega-cart version)
- v.1.3 – 31-May-2012 (Added support for C16/C116/Plus4, Sort directories, cosmetic changes)
- v.1.4 – 19-Jul-2012 (Added JIFFYDTV speed-up support for C64-DTV, Clear screen before RUN)
- v.1.5 – 03-Mar-2013 (Added support for C128, and uppercases disk images D64,D81,D71 etc.)
- v.1.6 – 20-Aug-2013 (Added support for Tap files using ITS modules, case insensitive disk images Dnp, TaP, m2I etc.)
Download: CBM FileBrowser v1.6 (3802)
source: vic20.it/cbmfilebrowser
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: Sitzgruppe, TRIAD, Lifeless Incorporated, Prof. Pi^2, Onslaught, Nostalgia, Genesis Project and Laxity.
Download:
source: csdb.dk
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Changelog SD HxCFloppyEmulator v1.8.2.26 (fat) & v2.1.2.26 (slim):
- Device init : the whole internal memory is now cleared at power-up.
Download:
source: hxc2001.free.fr
ASAP is a player of 8-bit Atari music for modern computers and mobile devices. It emulates the POKEY sound chip and the 6502 processor.
The project was initially based on the routines from the Atari800 emulator, but the current version has a completely new original emulation core.
Changelog ASAP 3.1.5 (2013-08-17):
- Android: fixed playback on Android 4.1+, disconnecting headset pauses playback, updates position and avoids “process not responding” during seek, starts in root directory if there’s no memory card.
- GStreamer plugin gets autoplugged (read: SAPs play in GStreamer-based players).
- WASAP plays music to its very end.
- Fixed crash on malformed RMT files.
- Restored Audacious 2.x compatibility.
- DEB packages.
- foobar2000 `*.fb2k-component` package.
Download: ASAP v3.1.5 (1480)
source: asap.sourceforge.net
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Firmware Slim SD HxCFloppyEmulator v2.1.2.24:
- SD Access enhanced : Better handling, track buffer size increased.
- Floppy interface mode enhanced : New Pin02/Pin34 Custom settings.
- SDCard file system support enhanced : Now support FAT 12, FAT 16 & FAT 32 formatted SDCard ! Any SDCard size are now supported !
- Direct access mode : New function to get and set easily the current index number in “file selector” & indexed mode.
- Lots of internal code optimizations/improvements and corrections…
- Write Support completely redesigned / reworked :
- Low level track format support added !:
- The host computer/machine can now do low level format of the disk images ! By this way the floppy disk image can be formatted with the right disk layout from the machine. All the tracks parameters used by the machine (sector size, interleave/skew, gap, format value, index mark…) will be written to the virtual disk tracks ! By this way the user have just to copy some blank HFE images to the SDCard, and format them with the host machine as with a real floppy disk to make them usable. Some blank disk images with various density will be available for download on the HxC2001 website.
- SD/DD/HD sector write support : all sector sizes are now supported ! : 128B, 256B, 512B, 1024B, 2048B, 4096B, 8192B…
- Unaligned track/sector write is now possible : Sectors of host formatted images and images imported from stream files (Kryoflux…) can now be written !
Download:
source: hxc2001.free.fr
For retro computing fans, arcade enthusiasts and fpga developers, newbies and experts. The replay will let you relive and revive classics or develop new tech.
source: fpgaarcade.com
I thank my dear friend for the donation of the Microsoft Xbox (chipped) + RGB Video Cable and a Compatible Joypad
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Download:
Firmware SD HxCFloppyEmulator v1.8.2.24:
- Write Support completely redesigned / reworked :
- Low level track format support added!
- The host computer/machine can now do low level format of the disk images !
- By this way the floppy disk image can be formatted with the right disk layout from the machine.
- All the tracks parameters used by the machine (sector size, interleave/skew, gap, format value, index mark…)
- will be written to the virtual disk tracks !
- By this way the user have just to copy some blank HFE images to the SDCard, and format them with the host machine
- as with a real floppy disk to make them usable.
- Some blank disk images with various density will available for download on the HxC2001 website.
- SD/DD/HD sector write support : all sector sizes are now supported ! : 128B, 256B, 512B, 1024B, 2048B, 4096B, 8192B…
Read more…
Autopsy:
I have removed the main filter capacitor of 0,47μF 250v (RIFA), avoiding that can explode.
from Wikipedia:
The Apple Monitor // was a CRT-based green monochrome 12-inch monitor manufactured by Apple Computer for the Apple II personal computer family. Apple didn’t manufacture the monitor until halfway through the lifespan of the II series.
The business-line Apple /// had its own Apple Monitor /// long before. Many home users of Apple II computers used their televisions as computer monitors before the Monitor // was released. It featured an inner vertical-swiveling frame. This allowed users to adjust the viewing angle up or down to suit their taste without the addition of a tilt-and-swivel device.
The Monitor // was widely adjustable for the time, as it included adjustments for the size and location of the image on the screen. These adjustments had a very small influence on the picture, however, much to the disliking of some users. The Monitor // was designed for the Apple II+, but was used widely throughout the Apple II product line, most recognizably on the Apple IIe.
Download:
source: wikipedia
A new version of the firmware for the interface C64SD Infinity + ITS Module by Manosoft is released.
Changelog:
- Added support for the long filenames and the ones containing special characters.
Download: C64SD Firmware v0.10.3.8 (1556)
source: manosoft.it
A new version of the firmware for the interface 1541 Ultimate II is released. This version runs only on the 1541 Ultimate II cartridge (new fpga).
Version 2.6h includes some new features and fixes:
- Timing fixed for C64C
- Newer version of built-in MOD player.
- Bug fixes regarding USB stick removal.
- Enhancements under the hood for networking support. Network support will be enabled later, is not part of this version!
Release notes:
- Version 2.6h contains some small fixes on top of 2.6d. This build is a DUAL DRIVE version with NO SID emulation.
Download: 1541 Ultimate II Firmware v2.6h (1511)
source: 1541ultimate.net
Autopsy:
The INDESIT T12 it’s a 12 inches B/W screen with 6 programs preselection and classic potentiometers tuning search for each program. It can be powered even with a 12volt source with a special socket on the rear side. (see photo)
It doesn’t weight much because it has not transformer in it but a special power supply converter. Was first 6 programs B/W television from INDESIT, earlyer model was with Rotary tuners. INDESIT was originary from Orbassano Near TORINO In Italy and indeed the telly here shown comes from there. It was a very big industry conglomerate present in all European lands even In Norvay.
INDESIT has a very heavy controversed history which is made of high loss of work places for people, financial disasters, loss of market, closing of production location and finally a complete destruction of one of the bigger Italian industry on European level. It was then brand name aquired by Merloni Elettrodomestici known as Ariston.
Video transmission made with a UHF Transmitter CH 36.
source: obsoletetellyemuseum.blogspot.it
I have upgraded my Personal Computer IBM 5160 by adding an 8-bit ISA Sound Card (adlib) and Video Card Vga 8/16 bit ISA from Octek.
Below some videos of the tests done:
Read more…
Recent Comments