NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
- The Third Planet From Altair (RPL)
- The Last Ninja [1581]
- DX-7 Sounddesign
- Combat Crazy +7H (EasyFlash)
- Rogue Burger One +5F
- Laura64 Preview V2 +2T
- Infernal Runner +1DT
- DX-7 Support
- (Super) Bonkey Kong +2HD
- Demons Castle 2 [english]
- Cow & Chicken Preview (TRIAD/PROTOVISION)
- Combat Crazy +7H
- Limbo Preview
- Hibernated 1: This Place is Death (R17)
- Drugwar 64
- Hibernated 1: This Place is Death (R17) +D
- Zombie Calavera Prologue – Hokuto Force
- Zombie Calavera Prologue – Hardstyle
- Rush Preview +2
- The Scroll of Akbar Khan +1DMW
- Drugwar 64 V1.05
- Terminator 2 +H (EasyFlash)
- Brainway +DCM
- Blastopia
- Ill Savior Preview 2
- CETI 21 – Special Edition +2 [seuck]
- Blastopia +6HD
- Aviator Arcade II Preview V2 +3
- Illsavior Preview 2
- Fizz +1F
- Austro-Comp E1+E2 [german]
- Aviator Arcade II Preview [sd2iec]
- Bomberland 64k [sd2iec]
- Spider Maze +3D
- Spider Maze
- Highnoon +6DGMH
- GameTro +
- Get Off My Garden! +5H
- LumberJack Basic
- Four in a Row Master +T
- Caverns of Khafka +10D
- Street Gang +7DH
Download: All Games in One Archive (7144)
source: csdb.dk
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports: 
+ many more….
USB Stick STM32 (Gotek) HxC Floppy Emulator Firmware v3.1.25.1a -> v3.1.32.1a cumulative changelog:
- Menu subsystem refactored.
- Smaller code size with more features.
- Menu OLED and sound parameters (Video Inverse, contrast, step sound) are now taking effect immediately.
- Code optimizations.
- CPC DSK : Write cache flush timeout set to 2 seconds.
- Once again more code size optimizations!
- More code size optimizations.
- STM32 startup / init functions refactored (WIP).
- Flash memory code size reduced.
- Inversed Floppy Ribbon detection at power-up : “rib” (7 segments display) or “Floppy ribbon reversed !” (LCD/OLed display) message printed at power-up if the floppy ribbon is not connected properly.
- Fix a regression introduced into the v3.1.28.1a : Fix normal and indexed mode possible browsing issues (unexpected wrap to index 0). Please update !
- OLED screen : Standby/screen saver mode – The screen is now dimmed to a minimal level. The standby delay can be changed into the setting menu.
- OLED screen : New Menu entry – “Video” Polarity mode (Normal/Inverse).
- Files Browser : All Files/Folders with the hidden attribut set are not shown anymore… (Hide Windows/MAC system folders).
- Push buttons Auto-repeat : Better/Smoother rate changes. Rate changes delays adjusted.
- Thomson *.FD file support : Faster Loading (sectors interleave factor fixed).
- Fix the “clear settings”/reset factory function.
This is only a little part of the changelog. The original one is very long and you can read it here. (instruction manual here)
Download: USB Stick STM32 (Gotek) HxC Firmware v3.1.32.1a (1090)
source: hxc2001.com
A new version of the firmware for the Ultimate-64 by Gideon is released.
Differences with previous official release V1.06:
- SID has been improved quite a bit:
- The internal SID is now consistently referenced as “UltiSID”, to avoid confusion with other SID products.
- Various bugs, like the phase of the filters, and the routing of Voice 3 when the VOICE3OFF bit was set have been corrected.
- A number of SID filter curves have now been implemented and can now be chosen from the configuration menu.
- The resonance can be changed to two different settings.
- Combined waveforms can now be selected between 6581 and 8580.
- Internal bus charge in the SID is now emulated.
- The 6502 core has been improved. All ‘stable’ illegal instructions are now fully operational:
- SLO $07 $17 $03 $13 $0F $1F $1B
- RLA $27 $37 $23 $33 $2F $3F $3B
- SRE $47 $57 $43 $53 $4F $5F $5B
- RRA $67 $77 $63 $73 $6F $7F $7B
- SAX $87 $97 $83 $8F
- LAX $A7 $B7 $A3 $B3 $AF
- DCP $C7 $D7 $C3 $D3 $CF $DF $DB
- ISC $E7 $F7 $E3 $F3 $EF $FF $FB
- ANC $0B
- ANC $2B
- ALR $4B
- ARR $6B (including decimal mode!)
- SBX $CB
- SBC $EB
- LAS $BB
- LAX $AB is stable with constant 00.
- U64 settings are now restored when the machine resets. This resets the SID settings after using Auto Config + internal SID player.
Download:
source: ultimate64.com
Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+)
The emulator substantially reproduces this legacy machine in minute detail.
Changelog:
- SID envelope timing fixes. SID sustain register cycle accurate response to changes. Update to the SID noise write back behaviour.
Download:
source: hoxs64.net
Onslaught / Offence / Vandalism News Staff, bring to you the 68th issue of the Vandalism News.
Download:
source: csdb.dk
ARMSid (6581/8580 Replacement) by Nobomi.
I could not resist the temptation to try also this emulation of the SID 6581/8580 with the STM32F410 ARM Cortex M4, i’m talking about the ARMSid by Nobomi.
The fast shipping and the courtesy of Nobomi are certainly very well but also the packaging, the ARMSid is shipped in a plastic case to avoid any problem with the shipping.
The sound and the “audio” feeling are good like the SwinSID Ultimate but better, personally i would place the ARMDSid between the Original SID and the SwinSID Ultimate, Nobomi you have made a very good job. Congratulations.
Nobomi also wrote a software for Commodore 64 to configure the various ARMSid options and another software to update the Firmware.
Some information taken from the Nobomi site:
What is it ?:
- A new replacement of the MOS6581 and MOS8580 used in the Commodore C64. It is minimalistic (in simplicity of circuit and use, not in function and power).
- Real “plug & play” solution. Just insert instead of the original SID into the slot and it’s done.
- It determines (through supply voltages) which chip it replaces and starts the appropriate emulation (it can be changed later in software).
- No need to switch the PAL / NTSC version, the circuit uses directly the clock from the computer bus, always synchronous with the C64.
- It also emulates analog inputs (joysticks, mouse, etc. – POTX and POTY inputs)
- Analog output is sufficiently buffered, it is not necessary to change anything on the computer board for proper operation.
- Output sampling frequency is 1/16th bus clock of C64 (approx. 62kHz), real 12bit D/A converter, no pwm.
- Filters completely transferred to digital form, emulated by float point arithmetic.
- Significantly lower noise level and less interference from the power supply than the original :)
- Lower power consumption than the original.
- Firmware update possible inside the C64.
- Emulates all waveforms, and even “samples” (at least some of them, Ghostbusters laugh, Chimera screams at you).
- Full support of analog filters (LowPass, BandPass, HighPass, combination, Q quality control).
- Emulation of OSC3 and ENV3 registers (little delay, approximately 16 clocks of the C64 bus).
- Joysticks and mice work.
What is inside ?:
- A few resistors, capacitors, one stabilizer, one opamp and a processor. That’s all, parts only from one side.
- The only programmable circuit is the STM32F410, ARM Cortex M4 with HW float point arithmetic at 100MHz.
- Analogue output amplified via the AD8515 opamp.
- Stabilizer for the 3.3V processor, the processor itself has 5V tolerance inputs.
Firmware:
- New features in FW 2.6:
- Optimization for speed again (approx. 10ns more faster response to read registers, faster processing of writing registers).
- New features in FW 2.5:
- Again faster interrupt (approx. 10ns more faster response to read registers).
- New features in FW 2.4:
- Further optimization of the interrupt (approx. 20ns faster response to read registers).
- New features in FW 2.3:
- A part of source code (interrupt routine) has been rewritten in assembler and manually optimized.
- It makes a possibility to control the bus only through the CS signal (no need for O2 clock synchronization, so it can run on systems with a different CPU than MOS6502 now).
- Low frequency limit and filter strength settings and saving settings to permanent flash memory.
Gallery:
Download:
ARMSiD Video:
source: ARMSiD Homepage
Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+)
The emulator substantially reproduces this legacy machine in minute detail.
Changelog:
- SID envelope timing fixes to accommodate VICE test programs in testprogs\SID\env_test\
- Also improved is the timing of gate attack during release and gate release during attack as measured by own test programs.
Download:
source: hoxs64.net
What is DiagROM?
DiagROM is a diagnostic tool for the amiga computers.
And it is to be used on defective machines, trying to help no-boot situations etc.
You simply replace the Kickstart roms in the Amiga with the DiagROM. and when poweron. your Amiga will start a diagnostic software. It will try to dump info on the serialport (and actual menus etc aswell) while also trying on the screen.
Changelog:
- New memory-detection routine that hopefully finds more memory.
- A600/1200/4000 IDE detection.
- Some bugfixes. (look at releasedata for more info)
- Powerup extras:
- press left mousebutton at power on, Screen will be disabled and IF there is fastmem present, fastmem will be used instead of chipmem. Serial console is only option.
- if you press right mousebutton at poweron. Computer will use the beginning of detected ramblock instead of end.
- (you can combine both buttons at boot)
- fire on joystick at power on:
- Serialport output is disabled. this to make the machine to start with broken Paula. DiagROM also tries to detect broken paula at start and will disable serial if detected. (this detection is far from 100%)
Download: DiagoROM v1.1 Stable (1015)
source: diagrom.com
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
- Bad Tiling +2H
- XXV
- Snow Strike [easyflash]
- Bad Blood [easyflash]
- XXV +H
- The Legend of the Amazon Women +4MFGD
- Zenji +3HD
- Enforcer +11 [easyflash]
- Scuttlebutt 64 +5
- Walliball +4HF
- Lerppu game
- Wolfling Preview V2 +
- Tinyrinth Escape Preview
- Dan Dare Trilogy [easyflash]
- Walliball +H
- Giana Sisters 30th Anniversary Preview 2 +7
- Tinyrinth Escape Preview +2
- Giana Sisters 30th Anniversary Preview 2 +C
- Enforcer +11DGI
- Wolfling Preview V2
- Shadow Switcher
- Shadow Switcher +5C
- Exterminator [reu]
- Scuttlebutt 64
- Street Defender V1.5 [VR64]
- Wolfling Preview V2
- Mashed Turtles
- Mashed Turtles +F
- Fantasia
- Street Defender V1.5 +4D
- Barriers
- Cruising on Broadway Preview +
- Crank Crank Revolution – Gubbdata Edition +1F
- The Bear Essentials +3DP (Special Edition 2018)
- Tini-Mini +
- Cruising on Broadway +2H
- Vizawrite 64D – PXLfont88665b-RF2.0
- Mad Race
- Mad Race +
- Startexter 64 [german]
- Knight Lore +D
- Knight Lore +D (Ons)
- Knight Lore +D (Excess)
- Knight Lore +D (Raiders)
- Star Rank Boxing +5D
- Tower of Rubble 64
- Familiada 2018 [polish]
- Tower of Rubble 64 +1D
- Combat Crazy +7H
- Brush up your English [1581, CMD]
- Knight Lore
- Diskmag Creator [german]
- Multi Man 64 Preview
- The Third Planet From Altair
Download: All Games in One Archive (6763)
source: csdb.dk
Firmware upgrades for THEC64 Mini provide new features and/or correct any technical issues.
We always recommend that you use the latest version of the firmware.
Version 1.1.4 – Changes:
- Corrects a recent firmware issue that prevented joysticks like the Logitech F710 from being detected.
Please be aware there is currently a 256 item limit (files and/or folders) to assist improved USB memory stick performance.
Download: TheC64 Mini Firmware v1.1.4 (2117)
source: thec64.com
Very nice adapter designed by Rolo that allows you to use the Rolo Multi-Cartridge also on the Emerson Arcadia 2001 / GIG Leonardo and Hanimex HMG-2650 console.
The Eprom need to be installed in the Multi-Cartridge and contains 64 games all fully working.
This is a good alternative for those who don’t want to spend an important amount of money for the Multicart Arcadia 2001.
Thanks Rolo for this great extension (Adapter) for the Multi-Cartridge.
Gallery:
Video:
source: atariage.com
Firmware upgrades for THEC64 Mini provide new features and/or correct any technical issues.
We always recommend that you use the latest version of the firmware.
Version 1.1.2 – Changes:
- Fixes an issue where some USB directory layouts result in an empty file list.
- Amended USB behaviour to help resolve issues users experienced with some USB memory sticks when using the File Loader.
Please be aware there is currently a 256 item limit (files and/or folders) to assist improved USB memory stick performance.
Download: TheC64 Mini Firmware v1.1.2 (1187)
source: thec64.com
Firmware upgrades for THEC64 Mini provide new features and/or correct any technical issues.
We always recommend that you use the latest version of the firmware.
Version 1.1.0 – Changes:
- New File Loader functionality. Please see File Loader for full details.
- Further improvements to response times.
- Fixing one small issue with the German Virtual Keyboard.
- Adding the missing help function in ‘Avenger’ to a joystick button.
Download: TheC64 Mini Firmware v1.1.0 (1545)
source: thec64.com
A new version of the firmware for the Ultimate-64 / Ultimate 1541 II / Ultimate 1541 II+ by Gideon and some enhancements by Markus is released.
Changelog of Ultimate-64 / 1541 Ultimate 2+ by Gideon
- NEW: Audio Mixer
- 1541 Ultimate II+ only:
- 1541 Ultimate II and II+ only:
- Can now be used in Ultimate 64
- Ultimate 64 only:
- SpeedDOS Parallel Cable (needs e.g. DolpinDOS roms)
- Interface type: Ultimate Menu picture overlay (HDMI-only)
- USB keyboard support. Like earlier firmware, press scroll/lock to enter/exit the Ultimate menu.
- Replacement of Charrom and BASIC.
- Display *.64 files as a directory via FTP:
- Every chosen FTP username enables this feature (*.d64 are shown as directory AND as *.d64 files)
- The username “d64″ deactivates the listing of *.d64 files (*.d64 are only shown as directory)
- The username “d642″ disables this feature completely, (*.d64 are only shown as files)
.. and there are many improvements not present in the changelog.
Note for the Ultimate 64:
You will need a kernel, basic and character rom after the upgrade. These roms are not included in the update. These roms are distributed with vice-emu, but you can also find them on zimmermans.net.
For instance, you could use these roms: 901225-01.bin (char), 901226.bin (basic) and 901227-03.bin (kernal). Roms with the .rom extension should also work.
Changelog of Ultimate-64 / 1541 Ultimate 2 / 1541 Ultimate 2+ by Markus
Changes in this release (compared to 3.3):
- You can now flash more alternative kernals and floppy roms (1541 Ultimate II+: 2, Ultimate 64: 3).
- Kernals and floppy roms can be loaded without flashing
- Pressing the following keys while turning on the Ultimate 64 will change the video mode to
- D => DVI
- H => HDMI
- R => RGB
- C => Composite/S-Video
- Fix writing to kernal via TCP Port 64 on Ultimate 64
- Fix Fast Reset on “Original” Kernal on Ultimate 64
Download:
source: ultimate64.com github.com/markusC64
Recent Comments