Home > Commodore CBM/PET family, Gallery, Projects / Repairs, Retro Computers and other stuff..., Today, Various > Pulizia e Riparazione di un Commodore PET 2001-8C

Pulizia e Riparazione di un Commodore PET 2001-8C

It Works!

Questa galleria mostra alcune fasi della riparazione del Commodore PET 2001-8C

Sono passati Due mesi da quando ho ricevuto il mio Commodore PET 2001-8 Chicklet scambiato per uno Sharp MZ-80k, era il giorno 28/08/2013.

La scheda madre era in condizioni disastrose, ci sono voluti due mesi e molta pazienza per rimetterlo in funzione.

Guasti riscontrati:

  • Caratteri confusi al boot.
  • Problemi con il motore del Registratore a Cassette (Datassette)

Componenti sostituiti e riparazioni varie:

Un numero non ben preciso di Corto Circuiti visibili e non visibili (sotto gli zoccoletti)

  • 2 x 6540 ROM Basic 1.0
  • 2 x 74LS00
  • 3 x 74LS157
  • 1 x 7805
  • 2 x Condensatore Elettrolitico/Tantalio.
  • 1 x Motore Registratore
  • 16 x 2114 RAM

Mi voglio soffermare sulle ram. Ho notato che il PET 2001-8 non digerisce bene tutte le ram.

Queste da me provate non funzionano correttamente:

  • TESLA 2114 (2/8)
  • MM2214N
  • SY2114-2
  • HKE2114L-2

Ho dovuto acquistare diversi stock di ram 2114 per trovare la ram che funzionava correttamente. Le ram che funzionano bene sono le ELCAP 2114L-3.

Devo ringraziare Andrea Pierdomenico per i test delle ROM effettuati sul suo PET 2001-8 e Alessandro Polito per lo scambio.

  1. Tim
    26 April 2019 a 20:34 | #1

    What did you use for a tape motor replacement?

  2. 1 May 2019 a 0:04 | #2

    @Tim

    HI, i have used a Commodore Tape Recorder with mechanical problem but with a good motor (used for spare parts) see the photo for the model (the white one)

  3. Giacomo
    23 October 2021 a 14:06 | #3

    Hi there
    how it works this adapter? I saw that has some pad “A15/A14/A13″…but they must be used?
    From what I understand they are useless … they just look like test points

    I mean that if I mount a 27C512 on this adapter I have to mount all five resistors and then load the 2KB file in the first memory allocation of the Eprom? Should I replace H5 ..

    Thank you!
    B.R

*