Archivio

Posts Tagged ‘vampire’

Rilasciato GOLD2.12 per la Vampire

Rilasciato il nuovo firmware GOLD2.12 per la Vampire.

Changelog:

  • New 15/16Bit RTG modes (R5G5B5PC, B8G8R8A8)
  • HW mouse improvements (sprite area size, x/y-position coords)
  • VampireSupport 40.41.
  • fpsp080_00f4000_07Mar20.
  • Apollo specific CPU support library in ROM, named 68040.library (to be picked up by 3.1 and later SetPatch)
  • New minimal boot pic with the new melody.
  • SLOW CPU when PC in chipmem & rangermem (auto Turtle, select “ExpChip” with WHDLoad)
  • Improved Turtle Mode compatibility.
  • Enabled faster 32bit write for the IDE.
  • Improved rebooting, when using a MAPROM.
  • Updated EmuTOS ROM to 0.9.12 release (boot from uSD option added)
  • Improved FMOVEM.

Download: Vampire Core (743)

source: apollo-accelerators.com

Rilasciato Vampire GOLD2.10 Core per V600 v2 (.1) & V500 v2(+)

Rilasciato il nuovo firmware per la Vampire GOLD2.10 Core hardware V600 v2(.1) & V500 v2(+) e nuovi Saga Driver v1.4.

Vampire GOLD2.10 Changelog:

  • Added 4 different IDE speeds (V500)
  • Fixed SBCD instruction
  • Fixed ChipRAM detection
  • Improved CIA timings (V600)

SAGA Driver v1.4 Changelog:

  • Updated VControl to 1.6
  • Updated VampireSN for Vampire V4
  • Updated SDNet to 1.92
  • Updated V2ExpEth to 1.92

Download: Vampire Core & Saga Driver (1206)

source: apollo-accelerators.com

Rilasciato Vampire GOLD2.9 Core per V600 v2 & V500 v2(+)

Rilasciato il nuovo firmware per la Vampire GOLD2.9 Core hardware V600 v2 & V500 v2(+) e nuovi Saga Driver v1.3

Vampire GOLD2.9 Changelog:

  • Improved Power-OFF/ON on Amiga
  • Allow software to access on-board ROM chip
  • MapROM mapping support for Atari roms
  • Memory management support for Atari memory map
  • FPU Speed-up (51Mflops at x11 according to SysInfo)
  • FPU fully working under TOS
  • Modified Expansion post pin-out
  • Boot to EmuTOS with FIRE button on Power-ON

SAGA Driver v1.2/1.3 Changelog:

  • Updated VControl to 1.4
  • Added V2ExpEth.device 1.2
  • Updated SDNet.device to 1.2
  • Some more work on TX stability
  • Should recover from ENC Module hangs more often
  • Aligned with future EXPnet

Download: Vampire Core & Saga Driver (1101)

source: apollo-accelerators.com

Rilasciato Vampire GOLD2.8 Core per V600 v2 & V500 v2(+)

Rilasciato il nuovo firmware per la Vampire GOLD2.8 Core hardware V600 v2 & V500 v2(+)

Vampire GOLD2.8 Changelog:

  • Improved HDMI DMA support for misaligned screen pointers.
  • Minor FPU fix.
  • A500 RTC fix (V500).
  • Improved SDCard/SDNet support.
  • V500 V2+ Expansion port enabled.

SAGA Driver v1.1 Changelog:

  • Updated VampireGFX.card to 1.12
    • Adds Scanlines settings.
    • Assumes SOFTSPRITE=YES by default if not set in tooltypes.
  • Updated SDNet.device to 1.1.
    • Fix for x12 cores.
  • Added VampireGFX tooltypes documentation.

Download: Vampire Core & Saga Driver (1126)

source: apollo-accelerators.com

Rilasciato Vampire GOLD2.7 Core per V600 v2 & V500 v2(+)

Rilasciato il nuovo firmware per la Vampire GOLD2.7 Core hardware V600 v2 & V500 v2(+)

Vampire Changelog:

  • Added fully pipelined hard FPU with peak 78 MFlops
  • Added native support for all 68882 FPU operations without need of extra libraries
  • Added new high performance memory controller, reaching 600MB/sec memory speed
  • Added MapRom support
  • Added Workbench Hardware Sprite support
  • Added Scanlines optional mode for retro look of games on HDMI output
  • Added RangerMem (A500 slow memory) for better compatibility with some old games/demos
  • Added new boot picture
  • Improved MPU (memory protection) with catching memory access error Enabled
  • Improved AMMX2 instruction set with acceleration features for Video decoding, Image Decoding, 2D-games, 3D-games
  • Improved WHDLOAD compatibility
  • Improved Faster Boot time

SAGA Driver Changelog:

  • Added VControl 1.1 (replace VampireTool)
  • Updated SAGA driver installer
  • Updated SDNet to 1.0 (Bax)
  • Improved VampireGFX performance with AMMX (Bax)
  • Complete VampireGFX driver rewrite in ASM (flype)

Download: Vampire Core & Saga Driver (1087)

source: apollo-accelerators.com

(English) Vampire GOLD2 Core Released for V600 v2 & V500 v2

24 January 2017 1 commento

Ci spiace, ma questo articolo è disponibile soltanto in English.

Vampire 600 V2 HW Acceleratore per Commodore Amiga

Vampire 600 V2 HW Accelerator for Amiga

La scheda Vampire 600 V2 è un acceleratore hardware per Commodore Amiga 600. Non esiste nulla di simile sul mercato in grado di competere con le sue prestazioni ed il prezzo.

Caratteristiche Principali:

  • 128MB di Fastmem RAM.
  • Uscita digitale (HDMI).
  • SD card per HDD storage.
  • 64 bit core e piena compatibilita’ a 32 bit.
  • Aggiornamento del firmware senza bisogna di programmatori esterni.
  • Supporto per FPU e 16 bit Audio sono previsti con gli aggiornamenti futuri.

Galleria dell’installazione e testing:

Video Vampire A600 V2 Unboxing/Testing

source: apollo-accelerators.com kipper2k.com