Sharp MZ-80B

Sharp MZ-80B

Autopsy:

testo tratto dalla homepage di Wikipedia:

Lo Sharp MZ è una serie di personal computer venduti in Giappone e in Europa (in particolare Germania e Gran Bretagna) da parte di Sharp a partire dal 1978.

Sebbene sia comunemente creduto che MZ stia per “Microcomputer Z80″, il termine MZ in verità ha le sue radici nell’MZ-40K, un home computer in kit prodotto da Sharp nel 1978 basato sul processore 4-bit MB8843 e fornito con una semplice tastiera esadecimale per l’input. Questo fu presto seguito dai modelli MZ-80K, K2, C e K2E, basati invece sulla CPU Sharp LH-0080 (compatibile Z80) e con tastiera alfanumerica.

Dal primo modello basato sul processore Z80 fino all’MZ-2200 nel 1983, i computer MZ includevano il PC, il monitor, tastiera e registratore su nastro in una singola unità, come per esempio la serie Commodore PET. Era anche noto per non includere un linguaggio di programmazione o un sistema operativo in ROM, come l’IBM PC. Questo permetteva ad un gruppo di società esterne, a partire da Hudson Soft, di produrre parecchi linguaggi e sistemi operativi per il sistema. In un’epoca in cui i drive floppy disk erano troppo costosi per la maggior parte degli utenti, l’unità a nastro built-in dell’MZ era considerata più veloce e più affidabile che i drive dei computer competitori; comunque questo comportò che la serie MZ fu relativamente lenta ad adattare il floppy drive come accessorio standard.

Le serie MZ sono divise in diverse linee, tra cui la serie solo testo MZ-80K, la serie grafica MZ-80B e le serie MZ-3500/5500, basate su una architettura completamente differente. Nel 1982, la divisione televisioni della Sharp rilasciò l’X1, un computer completamente nuovo. Le serie X risultarono vendere più che la serie MZ della Sharp stessa. In risposta, Sharp rilasciò le macchine MZ-1500/2500, che vantavano migliorate capacità grafiche e sonore. Comunque questa serie ebbe un ridotto successo commerciale e questo portò poi la società ad abbandonare la linea in favore della serie Sharp X68000.

Il nome MZ sopravvive nelle iniziali di due dei prodotti di Sharp meglio conosciuti: la linea di PC Mebius e la linea di personal digital assistant Zaurus.

Sharp MZ-80B Loading Basic from Disk Drive CE 510:

source: wikipedia

  1. 20 April 2014 a 18:45 | #1

    Ciao Xad,

    Complimenti per l’MZ-80B.
    Ma dove lo hai trovato?
    Queste macchine di solito sono solo
    per il mercato interno Giapponese.

    Grazie,

    Libra

  2. Paul Chang
    30 March 2018 a 2:58 | #2

    Dear sir,

    Can I purchse 80B diskBasic( Sp6520) from you?

    Best regards,

  3. Paul Chang
    30 March 2018 a 3:10 | #3

    PS.

    Or any kind 80-B floppy base OS is fine.
    I possible I like have Floppy run on MZ80BF

  4. 27 June 2018 a 14:56 | #4

    Hi
    Help please !
    What is the geometry of the 5.25″ discs used on the A and B models please ?
    Is one of them 280k (35 tracks x 2 sides x 16 sectors of 256 bytes) ?
    Are both A & B the same ?
    Thanks in advance
    Malc

  5. 18 November 2018 a 22:24 | #5

    Dear Nightfallcrew,
    I am following your work since a while. I am also collecting old computers and trying to repair them, but I am not so advanced as you. Now I found a nice Sharp MZ-80B. The power supply capacitors are blown, so I removed them as you have described. Now the computer powers up properly, but shows only one green line at the center of the display (http://www.pocon.at/MZ80b.jpg). When I insert a disc into the floppy disc drive, the computer tries to boot from the disc. Hence the system itself seems to work. I assume that either the line transformer or some other capacitors are defective. Unfortunately I have no access to an oscilloscope, I am working only with a simple multimeter. Do you maybe have a hint how to debug the display or how to connect an external display for testing (e.g. a Commodore 1084S)?
    Thanks in advance and best regards,
    Günther

  6. 18 November 2018 a 23:18 | #6

    @Günther

    Hi Günther,

    Seems to close the vertical, try to adjust the internal potentiometers/trimmers of the monitor (for example: V-SIZE)

    D.

  7. 20 November 2018 a 21:04 | #7

    @xAD / nIGHTFALL
    Hi,
    well unfortunately the problem is now pretty obvious as I opened the monitor cover. Basically all capacitors have leaked (as you can easily see in the image http://www.pocon.at/MZ80_mon.jpg). So I might give it a try with hooking up a TV set (SCART connector) to the internal monitor connector. The second pin of the connector is supposed to be SYNC and the third pin should be (composite) VIDEO. The 15.75 kHz horizontal sync should be quite ok. However I am not sure about signal levels and vertical sync. Overall I believe an NTSC TV set or scan converter might work, so I guess I will give it a try…

  8. 21 November 2018 a 11:26 | #8

    @Günther

    No LEAKED! absolutrly NOT it’s only a GLUE which has turned yellowed with age.

    The MZ80 use: Sync H,Syc V, Video.

    Try adjusting the VERTICAL and HORIZONTAL trimmers slightly, take care high voltages in the monitor.

  9. 24 November 2018 a 18:22 | #9

    @xAD / nIGHTFALL
    I played around with the trimmers, but the image is unchanged (still just a horizontal line in the center of the screen). However I connected my GBS8300 CGA2VGA converter to the video pins on the MZ80B mainboard (#2=Csync/#3=Video/#4=GND) and immediately got a perfect image on my VGA screen. Unlike the MZ700 and MZ800 (having separate Hsync and Vsync signals on their external video connectors), the MZ80B mainboard just provides combined sync. The GBS8300 handles this very well, so I am satisfied with the result for the time being (http://www.pocon.at/MZ80_mon.jpg) ;-)

  10. Chris Hill
    16 July 2019 a 4:46 | #10

    where can i find tape images of games for this? like space invaders and such. software seems impossible to find.

*