Home > Firmware, News & Rumors, Today > U64/Ultimate-64(Elite) v1.34

U64/Ultimate-64(Elite) v1.34

E’ stato rilasciato un nuovo aggiornamento firmware per l’ultimate-64 (U64/U64E).

Difference with previous release V1.33:

  • RESTORE key to boot with default config: Implemented.
  • Bootloop problem with flashed CRT: Fixed.
  • C64 Hangup problem with reading debug register (D7FF): Fixed.
  • C64 Hangup when disabling SID socket: Fixed.
  • ARMSID config not working when UltiSid is in the same range: Fixed.
  • CIA2 I/O (UserPort) not working: Fixed.
  • Sprite collision in Antiriad: Fixed.
  • RGB mode sync polarity: Fixed.
  • PIO register fault: Flimbo’s Quest now working! (Thanks to Tom Roger Skauen, for his debugging efforts!)

Known issues:

Corrupted disk access with some loaders, when bus bridge is not on “Quiet” mode, and badlines are disabled. We know this affects Geos MP3. Still under investigation.

Download:

source: ultimate64.com github.com

  1. 22 September 2020 a 22:21 | #1

    I have the U-64 and installed firmware V1.34 but I still have no clue if it is possible to have devices on the cartridge port (RAM/ROM/IO) also run at more than 1MHz.

    Anybody checked on this ?

*


8 + = dodici