Kung Fu Flash Cartridge Aggiornamento Firmware v1.51
E’ stato rilasciato un nuovo aggiornamento firmware per la Kung Fu Flash Cartridge di Kim Jørgensen.
Changelog:
- Support MACH 5 cartridge. Thanks Lord Kopromaster.
Download:
E’ stato rilasciato un nuovo aggiornamento firmware per la Kung Fu Flash Cartridge di Kim Jørgensen.
Changelog:
Download:
SD-1000/PiCOLECO/PiRTO-II sono delle Flash Multicart per Sega SC3000/SG-1000,CBS ColecoVision,Mattel Intellivision di Andrea Ottaviani basate sulla versione economica della Raspberry Pi Pico clone (pcb di colore viola).
Ho voluto provare e assemblare questo interessante progetto e devo dire che sono rimasto molto soddisfatto. Ho anche contattato Andrea per un piccolo problema di caricamento delle ROM per la Multicart Intellivision ed e’ stato subito disponibile sebbene era Domenica ora di pranzo :-D
Ho assemblato due Multicart per ogni modello di console perche’ appena ho informato il mio amico Andry di questo progetto le ha volute anche lui :-D
Le Multicart che vedete in questo articolo NON sono in vendita, per maggiori informazioni riguardo il firmware, programmazione fw, gerber, stampa 3D per la custodia vi consiglio di visitare il sito di github dove sono stati pubblicati questi progetti.
Quanto sono andato a spendere per la singola multicart?
Piu’ o meno per ogni singola Flash Multicart completa di tutti i componenti si andrà a spendere circa €6.00.
Sono compresi i componenti che avevo gia’ in casa e il minimo ordine da JLCPCB per ogni PCB che sono 5 pezzi, di conseguenza ho fatto la divisione sul totale della fattura di JLCPCB.
Scarica le ROM per Sega SC3000/SG-1000, ColecoVision, Intellivision (inclusi CFG mapper) completamente rinominate e suddivise per cartelle in ordine alfabetico qui.
Flash Multicarts Cartridge Case Shell Cover:
L’ultima foto con una piccola modifica del foro per l’inserimento dei copribottoni colorati.
Come aggiornare il firmware con il case chiuso? È necessario premere il pulsante sul PI Pico Purple mentre si inserisce l’USB-C per l’aggiornamento del firmware.
Totalmente escluso ogni volta svitando e riavvitando le viti, quindi microforo da 1,5 mm nella posizione giusta, perfetto.
Galleria:
E’ stato rilasciato da Nobomi un nuovo aggiornamento firmware per l’ARMSiD.
News features and fixes in FW 2.16:
Download: ARMSiD v2.16 [PRG/D64/CONFIG] (426)
source: nobomi.cz github.com/nobomi/Arduino-ARMSID-configurator
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico di Frenetic è un sostituto del chip SID per C64 basato su microcontrollore. Gli ingressi analogici per paddle e mouse sono disponibili proprio come per il SID originale.
Changelog:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.202 (368)
source: c64-wiki.com github.com/frntc/SIDKick-pico restore-store.de
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico di Frenetic è un sostituto del chip SID per C64 basato su microcontrollore. Gli ingressi analogici per paddle e mouse sono disponibili proprio come per il SID originale.
Changelog:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.201 (323)
source: c64-wiki.com github.com/frntc/SIDKick-pico restore-store.de
E’ stato rilasciato un nuovo aggiornamento firmware per l’Ultimate U2+L da Gideon.
Changes in 3.11a:
Due to “life” (e.g. house renovation) there has not been any time for testing this firmware for other hardware platforms. Will come soon.
Download: Ultimate U2+L v3.11a Firmware (440)
source: ultimate64.com github.com facebook
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico di Frenetic è un sostituto del chip SID per C64 basato su microcontrollore. Gli ingressi analogici per paddle e mouse sono disponibili proprio come per il SID originale.
Changelog:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.20 (331)
source: c64-wiki.com github.com/frntc/SIDKick-pico restore-store.de
The return of the Hybrid Sid Player by xAD/Nightfall
Basato sul progetto di Markus Gritsch pubblicato negli anni 2011-2015 sul forum dangerousprotypes. Grazie Markus.
Changelog:
v2.00 – 11/5/2024
Added:
Below is an excerpt from the “config.ini” file.
# FPGASid/Armsid Auto Switching (0:Disabled – 1:Socket #1 – 2:Socket #2) – default: 0
# When you use this mode the other socket it does not activate automatically.
FPGASID_SOCKET=0
When choosing this mode the FPGASid must be installed ONLY in one of the two sockets, you must also choose which socket to use for the FPGASid by editing the configuration file.
When configuring auto switching for the FPGASid during boot the SID Player is displayed the message “FPGASid Socket #” followed by the socket number where the FPGASid was configured in the configuration file. This message is intended only to inform you that the configuration has been correctly activated.
*** Please read if you want to use the FPGASid in Auto Switching mode ***
The status LED indicating the SID that is used to play the song will remain fixed on the socket where the FPGASid was installed, therefore it will not change between Socket #1 and Socket #2.
The display of the SID model from the music track being played will consequently be displayed Only on the display.
The ‘sidSet’ mode will work exactly as before, the only difference is that if no SID is installed in the other Socket no sound will be played :-D while if a SID model 6581 or 8580 is installed you will be able to compare the fidelity of the FPGASid by switching between the two SIDs (obviously better if the same model).
The configuration of the model of the Sid with which to play the piece of music in the configuration file although working in this case it is to be considered Virtual because we would no longer have a change of state between Sockets for each SID model, therefore i decided to assign a static numbering to the SID.
For files in DMP format (conversion from RSID to RAW) playback is automatically forced with the 8580 SID of the FPGASid.
Jumpers to configure if the FPGASid is installed:
Updated:
Fixed:
NOTE: The SID Player currently only supports the FPGASID for SID auto switching.
NEW TAG: C64 BIG GAME PACK
E’ stato rilasciato del nuovo Software per Commodore 64.
Titoli:
Download: All Games in One Archive (2145)
source: csdb.dk
Dopo quasi 18 anni dall’ultima volta che avevo utilizzato questa interfaccia usb (eMPIA con chipset EM2820) per acquisizione segnali video analogici ero curioso di provare se funzionava ancora, sopratutto per un problema di driver.
Beh che dire funziona perfettamente sia con l’ingresso Video Composito che S-Video, S-Video e’ l’ingresso che sto utilizzando ora con un Commodore 64.
Testato con Linux (Driver incluso nel Kernel) e con Windows 10 (installati Driver per Windows 8).
Come software ho utilizzato il Guvcview per Linux e il VLC per Windows.
Galleria:
E’ stato rilasciato un nuovo aggiornamento firmware per la Kung Fu Flash Cartridge di Kim Jørgensen.
Changelog:
Download:
NEW TAG: C64 BIG GAME PACK
E’ stato rilasciato del nuovo Software per Commodore 64.
Titoli:
Download: All Games in One Archive (2718)
source: csdb.dk
NEW TAG: C64 BIG GAME PACK
E’ stato rilasciato del nuovo Software per Commodore 64.
Titoli:
Download: All Games in One Archive (3120)
source: csdb.dk
Recent Comments