Elektrosmog Game di ZeHa
Simpatico gioco ambientato in un labirinto. Lo scopo e’ raccogliere i diamanti nel minor tempo possibile.
download prg+source here: noname.c64.org
Simpatico gioco ambientato in un labirinto. Lo scopo e’ raccogliere i diamanti nel minor tempo possibile.
download prg+source here: noname.c64.org
notizia dal forum: Petscii “PETSCII.COM”
Sono disponibili 90 PCB uIEC SD v3.0. L’interfaccia uIEC utilizza lo stesso firmware di Ingo Korb per l’SD2IEC.
Caratteristiche tecniche:
source: petscii forums uIEC gallery
Forth è un linguaggio di programmazione molto vecchio e molto simile al LISP ma rispetto al Basic del C64 e’ sicuramente piu’ evoluto e dinamico.
Da Wikipedia: Il Forth è un linguaggio di programmazione sviluppato da Chuck Moore presso l’US National Radio Astronomy Observatory (NRAO) durante gli anni ’60 (ma che venne formalizzato solo nel 1977, per essere poi standardizato dall’ANSI nel 1994).
Il nome deriva dal fatto che Moore pensava fosse un linguaggio di quarta generazione (fourth generation language in inglese), ma il computer sul quale il sistema venne sviluppato ammetteva solo nomi di cinque lettere.
Il Forth prevede la possibilità sia di essere eseguito in modalità interattiva, rendendo possibile il suo utilizzo come shell in sistemi che non possedevano un vero e proprio sistema operativo, sia la possibilità di compilare sequenze di comandi per una loro successiva esecuzione.
Come linguaggio di programmazione vero e proprio, il Forth è dotato di un insieme di comandi standard piuttosto potente e di meccanismi che permettono di definire propri comandi, anche usando un mix di comandi standard e linguaggio Assembler. Dato che al livello più alto il codice sorgente di un programma Forth può arrivare ad assomigliare molto al linguaggio naturale inglese, è stato chiamato anche un linguaggio meta-applicativo.
download: noname.c64.org
wikipedia: forth
David Haynes DLH’s Commodore Archive has updated his page.
source: DLH Commodore Archive
Fantastico Music-Disk dal gruppo Triad, una raccolta di alcune delle migliori musiche Amiga portate sul Commodore 64.
download: noname.c64.org
SJLOAD is a C64/C64DTV software fastloader. Its main difference from normal fastloaders is that it only works with Jiffy-enabled drives and uses the Jiffy protocol. This makes it handy for people who have a Jiffy-enabled drive (also new hardware such as SD2IEC) but do not want to make the hardware changes necessary for exchanging the C64 kernal.
SJLOAD speed is a bit higher than normal Jiffy since SJLOAD uses the same protocol but a different implementation (it disables the VICII during load etc.). With an SD2IEC, SJLOAD is about 15% faster than a normal Jiffy kernal.
SJLOAD is loosely based on VDOS (1986) by Edward Carroll. However, the fast loading routines have been replaced completely by 1570.
download: picobay.com/dtv_wiki
Commodore 64 Porting from the original Amiga game by Ocean.
download the latest build here: pushover64
forum thread: ready64.org
Make Waves is a command line utility to make sinus waves for demos and such.
Each wave is composed of one or more discrete waveforms, which can be created independently. You can make waves that represent a full sine wave, any half of it or a quarter. You can also set a range between 0 and 255 to get suitable values for example to position sprites at the correct height.
You are also able to set a variable length for each wave up to 256 bytes.
download: noname.c64.org
Credits:
download: noname.c64.org
dtvtrans is a PC <-> C64DTV V2/V3 transfer solution. It uses a cable connected between the parallel port of the PC and a joystick port on the C64DTV. (port 1, port 2 and the user port supported).
The transfer speed is roughly 15 Kbyte/s PC -> DTV and 13 KByte/s DTV -> PC. Used with Lallafa’s dtv2ser+usb hardware it is roughly 17 KByte/s PC -> DTV and 19 KByte/s DTV -> PC.
dtvtrans+ 1.0 (20081122) 1570 Changelog:
download: picobay.com/dtv_wiki
SD2Browse by Hannu Nuotio. Changelog: v.0.5 – 8.11.2008
Files:
download: sd2browse05 (1788) - 14.94 kB
The new name for the project is: CBM FileBrowser
source: Petscii Forums
The flash utility can be used to (re)flash the DTV’s FlashROM. This way, installing new programs as well as replacing emulation ROMs (BASIC/KERNAL/CHARGEN – also see Kernalpatcher) can be done.
Changelog:
download: picobay.com/dtv_wiki
DTV Kernal V1.0 by Peiselulli of Tristar & Red Sector Incorporated.
Changelog:
download: noname.c64.org
Dtv2ser is a small hardware device that bridges TLR’s dtvtrans protocol used to communicate with a DTV via a RS232 interface to your Mac or PC.
By using a serial-to-USB adapter the dtv2ser provides dtvtrans access for all modern PCs where the original dtvtrans parallel cable cannot be used.
The new dtv2ser+usb board directly integrates the USB adapter and realizes the full dtv2ser functionality on a USB-stick-like device.
source: lallafa.de
Recent Comments