Archivio

Archivio per la categoria ‘Various’

Piedinatura dell’alimentatore del Commodore Modem 8010

31 August 2009 1 commento

din5m

  • PIN 1 = Common (GND)
  • PIN 4 = Free
  • PIN 2 = 14.6v (AC)
  • PIN 5 = Free
  • PIN 3 = 14.6v (AC)

Clicca qui per le foto del Modem.

ZX Spectrum +3 (Issue 1) Sound Fix *aggiornato*

22 August 2009 2 commenti

Qui lo Schema del Sound fix. (pdf)

dalla homepage di Cristian Secară:

La prima versione dello ZX Spectrum +3 (Issue 1) ha un grave errore di progettazione, l’uscita audio risulta completamente distorta.

  • Spiegazione tecnica: l’uscita analogica dell’integrato sonoro AY-3-8912 chip audio deve essere amplificato dall’emettitore del transistor, in pratica gli ingegneri si sono dimenticati di mettere una resistenza tra l’emettitore del transistor e la massa. Il risultato che il transistor lavora in switch-mode – il suono viene convertito da analogico a più livelli di ampiezza, come il vecchio sistema audio dello spectrum 48K.

source: secarica.ro ay8912 Demos

CBS ColecoVision Secam RGB connector pinout Hack *updated*

Coleco Vision RGB Hack

ColecoVision RGB Hack:

Nelle foto (dalla numero #3 alla numero #6) viene spiegato come prelevare il segnale RGB all’interno della console.

ColecoVision RGB pin:

__________________________________
\ o1  o   o3  o   o5  o   o   o8 /
 \  o   o   o   o   o13 o   o15 /
  \____________________________/

Pin Signal

 1  Red Output
 3  Green Output
 5  Blue Output
 8  Ground
13  Composite Synch
15  Audio Output (very low volume)

Pin della scart:

   ----------------------------21
  _| 19 17 15 13 11 9 7 5 3 1 |
 |                            |
 | 20 18 16 14 12 10 8 6 4 2  |
  ----------------------------

Pin Signal                     Signal level

 1  Right Audio Out
 2  Right Audio In
 3  Left Audio In
 4  Audio Ground
 5  Ground (blue)
 6  Left Audio Out
 7  Blue input                 (0.7V, 75ohm)
 8  Function select/AV control (9.5-12V = AV mode, >10kohm)
 9  Ground (green)
10  Reserved Data
11 Green input (0.7V, 75ohm) 12 Reserved Data
13 Ground (red) 14 RGB Blanking
15 Red input (0.7V, 75ohm) 16 RGB switching control (1-3V = RGB mode on, 75ohm) 17 Ground (sync signal) 18 Ground (RGB switching) 19 Composite Out 20 Composite Input (Synch) (as in 1Vpp video signal, 75ohm) 21 Common ground (shield)

Arcade Supergun MK III Fixed for my SNK MV-2F MVS

Fix:

  • I problemi di Contrasto Video sono stati risolti bypassando le 3 Resistenze a mio parere con valori nettamente errati per il segnale RGB. (Foto #6)
  • Il Connettore Jamma e’ troppo largo per la mia SNK MV-2F MVS bisogna ridurlo di 1 centrimetro circa. (Foto #7)

source: wikipedia

My old LPC Programmer (CheapLPC) for Xbox modchip

22 January 2009 10 commenti

The CheapLPC is a flashrom burner for the SST49LF020 chip, The Software can read back, and verify the contents of the chip.

The software is also compatible with any other CheapLPC based programmer, like that used in the Martrix by Xodus, Ozx Prog by OZx Modchips, Neurosys, and a few others.

Download: GreenProg (CheapLPC Programmer) v0.7 (1323)

source: wikipedia cheaplpc.com

Pong from Polistil (1979) with AV output.

6 November 2008 1 commento

Here’s the Pong in a chip from Polistil (1979) with the Famous chip TMS1965 (GI AY-3-8500 pins compatibile) from Texas Instruments.

have added a Composite Video / Audio output  intested of VHF antenna output.

wiki: Pong-Wiki

Homebrew UV Eprom Eraser

27 September 2008 Nessun commento

My homebrew UV Eprom Eraser. I have spent 8 euros for electrical components and 3 euro for the box.

Gallery: