Atari 130XE Repair con circuito S-Video modificato

Atari 130XE Repair with S-Video modified cicuit

Quando rimuovete un’integrato con il cacciavite bisogna stare attenti ad alzare l’integrato dallo zoccolo e non lo zoccolo dal PCB :lol:

Detto questo e dopo aver ponticellato la pista interrotta del GTIA e sostituito un RAM guasta il computer ha ripreso a funzionare correttamente.

Dopo la riparazione ho anche fatto la modifica per migliorare il segnale S-Video (la serie XE ha l’uscita anche S-Video).

Questa semplice modifica va a sostituire/aggiungere alcune resistenze e condensatori che nella versione XE sono errati per una resa perfetta del segnale S-Video.

Le istruzioni della modifica lo potete trovare nel link a fine articolo.

NOTE: La descrizione della modifica nello STEP 4 e’ errata non e’ Q2 ma Q3 e nello STEP 5 non e’ Q3 ma Q2.

NOTE2: Ovviamente dopo aver assemblato il computer ho notato che il tasto “B” rimaneva incastrato, il pistoncino aveva una crepa e’ bastato sostituirlo e il tasto ora funziona correttamente.

Galleria della riparazione:

Download: Svideo Atari 130XE Mod (489)

Pulitore alternativo per Floppy Disk 5¼ (Meccanica ALPS)

Floppy Disk  5¼ Cleaner (Alps mechanics)

Questo e’ lo stesso articolo del precedente “Pulitore Floppy Disk” con l’unica differenza che questa volta ho utilizzato una meccanica alps.

Ho anche collegato il Led ROSSO limitando il voltaggio con una resistenza da 680 ohm 1W.

Precedente Post:

Perché buttare via un lettore Floppy Disk Drive della Commodore con la testina interrotta potrebbe diventare un’ottimo sistema per pulire i Floppy Disk.

Come fare ? basta disassemblare tutta la parte che controlla il movimento della testina compresa la testina stessa.

L’alimentatore utilizzato e da 12v con almeno 1A, dovete collegare il positivo al filo MARRONE e il negativo al filo NERO del PCB controllo motore.

Buona Pulizia.

Gallery:

Zoo 2019: C64 – Risultati ufficiali del Demo Party

Questi sono i risultati ufficiali del Demo party Zoo 2019. Per maggiori informazioni o aggiornamenti visita il sito CSDB nella sezione CSDB ZOO 2019.

C64 Demo:

  • 1 – Out of Contex by Artline Designs
  • 2 – Void Mind 84% by Extend (*)
  • 3 – Able Marble by Accession
  • 4 – Metadimension by Pers’ Wastaiset Produktiot
  • 5 – Rebirth by Finnish Gold (*)
  • 6 – Rebels 1989 by Rebels
  • 7 – Nine Rings by Dr. TerrorZ
  • 8 – Odysseija by Wide Load
  • 9 – Demo1988 by Codetsu
  • 10 – Tales from the Crypt PETSCII Edition by wbochar
  • 11 – Kolmiolaeaeke by Galtin Ballway (*)
  • 12 – Dobbelganger by Grue

(*) Missing

C64 Music:

  • 1 – Cakewalk by Jangler
  • 2 – Touch the Sky by Flex
  • 3 – Ten Pokes by Jojeli
  • 4 – Break Rulez by Apollyon
  • 5 – Mala Gente by Zardax
  • 6 – Sour & Salty by Juzdie
  • 7 – The Wrath of Yamo by Abaddon
  • 8 – Jälkilöyly by Deetsay
  • 9 – Amazing Discoveries by LMan
  • 10 – Smoke and Mirrors by Stinsen/dLx
  • 11 – Shartnado! by Aomeba
  • 12 – Agent of Lies by ocean
  • 13 – Magical Shower by Warlord
  • 14 – Zoo Much Information by TDM
  • 15 – Banana Island Song by Flotsam
  • 16 – The Scobble Lotcher by Vegard
  • 17 – Atomshelter by Slimex
  • 18 – Retrospect 130 by Ferrara
  • 19 – I Held That Cheese for 2 Mins and Then I Ate It by Spider Jerusalem
  • 20 – Lo-Fi in My Basement by Uneksija
  • 21 – Hardware Malfunction by Proton
  • 22 – Zooong by Barik

C64 Graphics:

  • 1 – Raster Split by Electric
  • 2 – Phoenix by Facet
  • 5 – New Messiah by L3nin666
  • 6 – Crystaleyezed by Prowler
  • 7 – Mayor of Candytown by Debris
  • 8 – Escape from Zoo by Edi
  • 9 – Stroll by ptoing
  • 10 – High Hopes by Apollyon
  • 11 – Resting Ronin by MisBug
  • 12 – Kaiser Wieners Keg & Pickle by Mntrk
  • 13 – Super Off Road Homage by ilesj
  • 14 – Yksitoista by Debris
  • 15 – Sauna Anyone? by Mr. Masterzeus
  • 16 – Medusa by Fabs
  • 17 – Hanami in Roihuvuori by Moraff
  • 18 – Brazil Nuts by Moziz
  • 19 – 8th Gate by Rail Slave
  • 20 – Sweaty Pear by ptoing
  • 21 – Spacesplash by Dr. TerrorZ
  • 22 – Sunset in Varlaxudden by Moraff
  • 23 – Ilbu by Ilbu

C64 Basic Demo:

  • 1 – Basic V3 by Jupp3
  • 2 – Necessity by Codetsu
  • 3 – Sosialistinen tietokone by Jumalauta

C64 Disk Cover:

  • 1 – Jack of Apes by Electric
  • 2 – Damones at Zoo-Karaoke by Duce
  • 3 – Void Mind by Duce (*)
  • 4 – Pääkallot by Ilbu
  • 5 – Late Night Zoo by Junkie
  • 6 – Death Trip by Hani
  • 7 – Space Bar / Honey I’m Going to Zoo by Debris
  • 8 – Young God by Sipsitjadippi
  • 9 – Run U Fool by Sipsitjadipp
  • 10 – CCCCCCCCCCC by Manu

(*) Missing

Mixed Graphics:

  • 1 – Swimming Pool by Exotic Men
  • 2 – Ajattelija by Laserzone
  • 3 – Grill Master by Extend
  • 4 – Limpo by Fit
  • 5 – Channel0 by Atlantis
  • 6 – Soft Eagle by Extend
  • 7 – Revenge! by Fit
  • 8 – Madame by Panic
  • 9 – Hardware by Yleisradio
  • 10 – Elin by Yleisradio
  • 13 – Light by Dr. TerrorZ
  • 14 – Fast Blood by Panic
  • 15 – The Muumio Is From the Ranch, From the Texas by HiRMU
  • 16 – Ghost of the Zoo 19 by Hani
  • 17 – Manga Cat by Alice Li
  • 18 – Death by wbochar
  • 19 – Dragon by BemaSoft
  • 20 – Skull by wbochar
  • 21 – Ilmeenikunzoo by Manu
  • 22 – Örmi Ötökkä by Vilke
  • 23 – Tupladiski by Laserzone
  • 24 – Hampaat by Unkkubanaani

Download: Zoo 2019 Full Party Stuff (862)

source: zooparty.org

U64/Ultimate-64(Elite) v1.24 – U2/U2+ v3.6 Aggiornamento Firmware

E’ stato rilasciato un nuovo aggiornamento firmware per l’ultimate-64 / U2+ / U2 di Gideon.

Difference with previous release V1.21 / V1.22 (Initial Elite release)

Changes / Improvements to the U64 FPGA:

  • Added Drive B activity to the possible Case LED outputs.
  • Increased the number of UltiSIDs from two to eight.
  • Fixed Jailbar issue on HDMI output.
  • Fixed a Ledstrip issue that slipped into one of the previous versions.
  • Improved EMC performance.
  • Added Paddle Swap for the U64 Elite.
  • Increased application CPU performance.

Changes to the Ultimate 64 application:

  • Added support for 8-SID configuations.
  • Split the U64 configuration settings for better overview.
  • Added possibility to load / save and reset configuration settings.
  • Added the possibility to have temporary configuration settings.
  • Added choice of which UltiSID causes the LED strip to light up.
  • Added a Visual SID addressing editor.
  • Added detection and real time configuration of FPGASID.
  • Added detection and real time configuration of SwinSid Ultimate.
  • Added detection and real time configuration of ARMSID.
  • Fixed screen title when connecting to the machine through Telnet.
  • Added joyswap to the configuration menu.
  • Option to use Final Cart V1/V2 re-enabled.
  • Upgraded the OS to a newer version.

Unreleased work:

  • Flashing the ESP32 WiFi module from the file browser menu.
  • “Drive C” – software 1581 emulation by Scott Hutter .

Planned work for the upcoming release:

  • Keystrokes to quickly enable / mute audio channels
  • Connection between the ESP32 and the C64
  • A sample project for the ESP32, which can be used for others to port stuff like modem emulation.

Thanks go to Chris, Marty and Wilfred for providing various SID replacements to test with. Thanks to MarkusC64 for reviewing the FPGASID configuration code and providing useful feedback.

Ultimate 2+ Differences with previous release V3.4c

General Usability and Compatibility:

  • Added possibility to load / save and reset configuration settings.
  • Added the possibility to have temporary configuration settings.
  • Improvements to the 6502 CPU for improved 1541 compatibility.

Improvements to SID player:

  • Built-in SID player now supports MUS files as well (including stereo tunes) Music files can be found here: http://www.c64music.co.uk/
  • Added support for toggling screen on/off in Sidplayer with S key.
  • Added support for song length in SID header.
  • Fixed correct SID model selection for SIDFX boards .

Various other bug fixes:

  • Copying a file from a container now restores extension.
  • Fixed issue of copying file from .t64 files.
  • Added ‘Enter’ option for .t64 files.
  • User Interface improvements / fixes.
  • Fixed telnet connection – removing header upon connect (fixes random copy actions)

——————————————————————-

1541 Ultimate-II Differences with previous release V3.4c.

General Usability and Compatibility:

  • Added possibility to load / save and reset configuration settings.
  • Added the possibility to have temporary configuration settings.

Improvements to the 6502 CPU for improved 1541 compatibility:

  • Improvements to SID player:
    • Built-in SID player now supports MUS files as well (including stereo tunes) Music files can be found here: http://www.c64music.co.uk/
  • Added support for toggling screen on/off in Sidplayer with S key.
  • Added support for song length in SID header.
  • Fixed correct SID model selection for SIDFX boards.

Various other bug fixes:

  • Copying a file from a container now restores extension.
  • Fixed issue of copying file from .t64 files.
  • Added ‘Enter’ option for .t64 files.
  • User Interface improvements / fixes.
  • Fixed telnet connection – removing header upon connect (fixes random copy actions)
  • Changed default hostname to match target.

Dropped features:

  • Support for the ISO9660 filesystem.
  • The audio variant no longer supports recording TAP files. The dual drive version does.

Download:

source: ultimate64.com

Commodore Amiga 3000 alla Nicotina

Questo computer ha fatto girare la mia BBS “Hidden Power / Nightfall HQ” fino alla chiusura, negli anni precedenti la BBS girava su Amiga 1000 … poi A500 e A2000.

Pubblico anche due foto dell’epoca della mia storica “BBS Room” dove si puo’ vedere questo Amiga 3000 in funzione.

Faccio una breve descrizione di cosa era stato fatto e di cosa ho fatto per questo computer.

  • Nel 2001 ho rimosso la batteria e uno dei due Harddisk SCSI che era defunto.
  • Nel 2010 ho pulito il case esterno e interno e ho pubblicato le foto sul blog.
  • Nel 2018 ho pulito la tastiera.
  • Nel 2019 ho pulito accuratamente la motherboard che era ricoperta da uno strato appiccicoso di Nicotina (nella BBS Room si fumava molto)
    • Pulizia del Floppy Drive che oltre ad essere ricoperto dentro e fuori da uno strato appiccicoso di Nicotina c’era anche la Polvere, per sistemarlo ho dovuto disassemblarlo completamente.
    • Ho sotituito le ROM Kickstart 2.04 con la versione 3.1
    • Rimosso l’ultimo Harddisk SCSI defunto.
    • Installato “nuovo” Harddisk Quantum Maverick SCSI da 250Mb
    • Installato WB 3.1 e MagicWB + un paio di Demo e ovviamente Pinball Dreams versione per Harddisk.
    • Sostituito il chip controller SCSI WD33C93A con AM33C93A-16PC.
    • Pulizia del pcb tastiera e sostituzione gommini, piu di 20 tasti risultavano defunti.
    • Rimossa la scheda Zorro BSC / Alfa Data MultiFace Card 3 (multi Seriale) e installata la Village Tronic Ariadne II (Ethernet Card)

Tutto funziona alla perfezione come si puo’ vedere dalle foto.

Gallery:

Radio Shack TRS-80 Model 4 (Dual Boot Rom/128k/FreHD)

5 October 2019 1 commento
Radio Shack TRS-80 Model 4 (Dual Boot Rom/128k/FreHD

Ho ricevuto in dono… iniziamo male, ho recuperato, non ci siamo, ho acquistato, molto meglio, questo ennesimo computer della Radio Shack che mancava nella mia collezione.

Il Computer corredato di diversi manuali e Floppy Disk mi e’ stato dato da una persona (grazie Scott) che vive negli Stati Uniti, aveva scritto “QUASI PARI AL NUOVO” ed e’ questa la frase che mi ha attirato.

Il Computer e’ un Radio Shack TRS-80 Model 4 (GATE ARRAY) dunque di ultima produzione con tubo catodico a fosfori verdi.

Il venditore non scherzava dicendo che era “QUASI PARI AL NUOVO” e funzionante, il Computer e’ tenuto molto bene sembra quasi che non sia mai stato utilizzato, lo si puo’ osservare dal Tubo Catodico, dallo stampato del Monitor e Trasformatore di Riga, Tastiera, Case Esterno e interno e dall’alimentatore, il solito ASTEC, che non ha mai scaldato, perfetto.

Inoltre il sigillo di garanzia era intatto.

Siccome non c’era nulla da pulire/riparare ho fatto alcuni aggiornamenti hardware e piccole sostituzioni.

Cosa ho fatto:

  • Sostituzione dei 3 condensatori di filtro (RIFA) che di solito rimuovo e difficilmente sostituisco.
  • Convertito l’alimentatore ASTEC da 115v a 230v, questa versione dell’alimentatore lo permette perche’ ha la commutazione 115v/230v.
  • Sostituita la spina di alimentazione da 115v con una schuko.
  • Varie etichette per identificare che il computer e’ stato converito a 220v.
  • Installati 64k RAM per portare il Model 4 a 128k (modifica del filo blu inclusa)
  • Dual ROM per eseguire il BOOT da FreHD o da Floppy Drive. Ho utilizzato la ROM-el 2364 di Jim Brain che utilizza una Flash ROM (AT49F001AN) ma con pedinatura standard Mask ROM 2364.
  • Installato interuttore per lo switch Dual ROM nascosto nelle feritoie areazione senza forare il case.

Tutte le prove sono state fatte utilizzando l’interfaccia FreHD di Ian Mavric.

Gallery:

Download: TRS-80 M4 GA Dual Boot ROM (626)

Hoxs64 Commodore 64 Emulator Updated v1.0.23

1 October 2019 1 commento

Hoxs64 scritto da David Horrocks e’ un’ottimo Emulatore di Commodore 64 per Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+).

Changelog (v1.0.23):

  • Allow PC joystick to control up to 5 C64 keys.
  • Monitor refresh option added to emulation video settings.

Download:

source: hoxs64.net

C64 Big Game Pack: Croaky +2HF / Trogue64 +5H / X-Out +6DGI…

21 September 2019 Nessun commento

NEW TAG: C64 BIG GAME PACK

E’ stato rilasciato del nuovo Software per Commodore 64.

Titoli:

  • Spaceware Shuttle Designer
  • Stercore XD +1D
  • Stercore 64 +1D
  • Endless Forms Most Beautiful 64 +
  • C64 Chess Preview
  • Numen Engine Preview
  • Endless Forms Most Beautiful 64 +3D
  • Swarm 16k V1.1.0
  • Endless Forms Most Beautiful 64 V1.1 +3D
  • Swarm 16k V1.1.0 &D
  • Forgotten Worlds +13DI
  • SIDWAVE Shooter [seuck]
  • 4M Arena [disk]
  • LVDVS Preview
  • Wug +
  • Killer Bees V4 +2HF
  • X-Out +6DGI
  • War2One Preview
  • Donkey Trolls Preview +3H
  • Railroad Tycoon +D
  • Racing Destruction Set
  • Racing Destruction Set [easyflash]
  • Berks Four
  • Berks Four +3
  • Minesweeper 2019
  • Spider Maze Tutorial Preview +
  • Testgame Preview +
  • Let’s Make a C64 Game Preview
  • Stay Alive +M
  • Chopper Command +D
  • Chopper Command
  • Chopper Command +1D
  • Chopper Command +3D
  • Helicopter Game Preview
  • TRogue64 Preview +3DF
  • Duel Intro +1HF
  • Berks Four V1.1
  • Swarm 16k V1.1.0 +D
  • Desatranques Jaén [seuck]
  • 4M Arena +3 [disk version]
  • Masquerade +D
  • Budokan +3DFI
  • Beat Em Up Preview 2 +
  • SplatThem64
  • SplatThem64 +
  • Happy Blocks DX
  • 4 A Win
  • Bombakereső +D
  • Bombakereső +CD
  • Happy Blocks DX +2D
  • Bombakereső (minesweeper)
  • Bombakereső +1D
  • 4 A Win +F
  • Cruiser-X 79 Preview +2D
  • Cimbo +D
  • Cimbo +
  • Banana Republic Preview +3D
  • Cimbo +1D
  • Cruiser-X 79 Preview +2D
  • Mafia Assembler Edition Preview [german]
  • Cimbo
  • Lhasa Mountain +D
  • Dragon Hunter +2D
  • Crypt of the Pharaoh +D
  • Brick’s Revenge Preview +2
  • Mafia Assembler Edition Preview
  • Mr T’s Money Box +D
  • Mr T’s Alphabet Games +D
  • Mr T Meets His Match +D
  • Mr T’s Number Games +D
  • Mr T’s Shape Games +D
  • Mr T’s Measuring Games +D
  • Dragon Hunter +2D
  • Croaky +2
  • Croaky +2HF
  • The Temple of Doom +3FD
  • Trogue64 +5H
  • Rockball +2D

Download: All Games in One Archive (5791)

source: csdb.dk

Questo Commodore 16 ha visto giorni migliori

19 September 2019 Nessun commento
This Commodore 16 has seen better days

Questa riparazione e’ stata fatta solo per una sfida personale, il computer risulta comunque instabile e con diversi componenti guasti.

Dopo l’accurata pulizia il computer presenta questi problemi:

  • TED MOS 8360R2 non funzionante (la tastiera non funziona) anche sostituendo il TED non funziona, il TED e’ stato provato con un Commodore 16 funzionante e la tastiera continua a non funzionare.
  • PIO MOS 6529 da sostituire. La tastiera non funziona.
  • CPU MOS 8501 defunta.
  • Porte Joystick (vedi foto)
  • Il Connettore Cartuccia deve essere sostituito.
  • Modulatore senza coperchio (Sopra e Sotto)
  • Bisognerebbe sostituire gli zoccoli del TED e della CPU.
  • Altri pezzi arruginiti.
This Commodore 16 has seen better days

Galleria della riparazione:

Riparazione di tre Commodore 64

19 September 2019 Nessun commento
Commodore 64 Repair

Riparazione Commodore 64 ASSY 250425 (1 di 3)

Difetto:

  • Non aggancia il segnale Video.

Riparazione:

  • Sostituito 1 x MOS 8701 R1 (U31)

Commodore 64 Repair

Riparazione Commodore 64 ASSY 250425 (2 di 3)

Difetto:

  • Out of Memory.

Riparazione:

  • Sostituito 1 x RAM MT 4264-15 (U21)
Commodore 64 Repair

Riparazione Commodore 64 ASSY 250407 (3 di 3)

Difetto:

  • Schermo Spazzatura.

Riparazione:

  • Sostituito 1 x RAM MB 8264A-12 (U22)

Gotek (HXC) – Rotary Switch – Buzzer & Amiga 1200 OSD

19 September 2019 Nessun commento
2 x Gotek (HXC) with Rotary Switch - Buzzer & Amiga 1200 OSD

La solita modifica di una Gotek in HxC questa volta anche con il supporto OSD (On Screen Display) per Amiga 1200.

Gallery:

Video:

source: hxc2001.com

Riparazione Sinclair ZX-81 & Video Composite (ZX8-CCB)

19 September 2019 Nessun commento
Sinclair ZX-81 Repair & Video Composite MOD (ZX8-CCB)

Ho ricevuto da un’amico due Sinclair ZX-81 da riparare e approfittando del momento “sinclair” :-D ho riparato anche uno dei miei ZX-81 che e’ morto restando spento per anni :-(

Due su tre ZX-81 avevano l’ULA fottuta , mentre il terzo aveva la membrana disintegrata e corto circuiti causati da qualcuno che NON sapeva dissaldare/saldare correttamente.

Ho recuperato l’ULA da questo ultimo e ho sistemato quello che era messo meglio dei due aprofittando di fare anche la modifica Video Composito con il kit ZX8-CCB.

Ho riparato anche il mio ZX-81 sempre con l’ULA fottuta e installato la modifica Video Composito con il kit ZX8-CCB.

Ringrazio Marco Lucarelli per avermi regalato la modifica Video Composito e avermi lasciato per spare parts uno dei due ZX-81 senza ULA / membrana disintegrata e diversi cortocircuiti.

Galleria della riparazione:

Sostituzioni dei soliti condensatori elettrolitici dell’Amiga 600

9 September 2019 Nessun commento
Amiga 600 usual capacitors replacements

Ho sostituito tutti i condensatori elettrolitici della motherboard dell’Amiga 600.

Galleria delle riparazione:

Amiga 2000 sostituzione zoccolo della CPU

9 September 2019 Nessun commento
Amiga 2000 cpu Socket replacement (defect sometime Black Screen)

Ho sostituito lo zoccolo della CPU dell’Amiga 2000 perche’ il computer presentava strani problemi al boot, esempio : schermo nero.

Dopo la sostituzione il problema non si e’ piu’ presentato.

Gallery della riparazione:

Riparazione Texas Instruments TI-99/4a

9 September 2019 Nessun commento
Texas Instruments TI-99-4a Repair (2019)

Riparazione Texas Instruments TI-99/4a.

Difetti:

  • Schermo Nero e suono a singolo tono in background.
  • Schermo Spazzatura.

Componenti sostituiti:

  • 1 x SIGNETICS C2E011 ROM (U610)
  • 1 x TMS4116-15 RAM (U106)

Galleria della riparazione: