Archivio

Archivio per la categoria ‘News & Rumors’

Pi1541 (Raspberry Pi 3B Commodore 1541 Disk Drive Emulator)

Ci spiace, ma questo articolo è disponibile soltanto in English.

Era un Commodore Single Drive Floppy Disk VC-1541

It was a Commodore Single Drive Floppy Disk VC-1541

Le immagini parlano da sole, non c’e’ bisogno di scrivere nulla.

Contiene immagini forti, che potrebbero urtare la tua sensibilità. :-P

durexForth v1.6.4 (Linguaggio Forth per Commodore 64)

Forth è un linguaggio di programmazione molto vecchio e molto simile al LISP ma rispetto al Basic del C64 e’ sicuramente piu’ evoluto e dinamico.

Il Forth è un linguaggio di programmazione sviluppato da Chuck Moore presso l’US National Radio Astronomy Observatory (NRAO) durante gli anni ’60 (ma che venne formalizzato solo nel 1977, per essere poi standardizato dall’ANSI nel 1994).

Il nome deriva dal fatto che Moore pensava fosse un linguaggio di quarta generazione (fourth generation language in inglese), ma il computer sul quale il sistema venne sviluppato ammetteva solo nomi di cinque lettere.

Il Forth prevede la possibilità sia di essere eseguito in modalità interattiva, rendendo possibile il suo utilizzo come shell in sistemi che non possedevano un vero e proprio sistema operativo, sia la possibilità di compilare sequenze di comandi per una loro successiva esecuzione.

Come linguaggio di programmazione vero e proprio, il Forth è dotato di un insieme di comandi standard piuttosto potente e di meccanismi che permettono di definire propri comandi, anche usando un mix di comandi standard e linguaggio Assembler. Dato che al livello più alto il codice sorgente di un programma Forth può arrivare ad assomigliare molto al linguaggio naturale inglese, è stato chiamato anche un linguaggio meta-applicativo.

Download: durexForth v1.6.4 (D64) + Manual (904)

source: csdb.dk github.com

C64 Big Game Pack: Chilly Willy +4DGH / Ice Busters +6DGH …

E’ stato rilasciato del nuovo Software per Commodore 64.

Titoli:

  • Valkyrie 3 – The Night Witch [seuck]
  • Galencia Khaos Sphere Preview
  • Galencia Khaos Sphere Preview-GP
  • Ski Or Die and Skate Or Die [easyflash]
  • Ski Or Die and Skate Or Die [easyflash]-SK8
  • Hermetic +6DT
  • The Games Summer & Winter Edition [easyflash]
  • Western Games +D [easyflash]
  • Western Games +D
  • Jake The Snake V4.1
  • Ski Or Die and Skate Or Die [easyflash]-KR
  • The Simpsons Arcade Game [easyflash]
  • Project Space Station [easyflash]
  • Bewitched Preview 2 +2
  • Crank Crank Revolution
  • Jake The Snake V5.0
  • Snek +1
  • Crank Crank Revolution +1F
  • Shadow of the Beast [scpu]
  • Solar Fox +3DGMH
  • Digger
  • Lumberjack Deluxe Preview +
  • Rogue Burger One Preview +2
  • Beat Em Up Preview
  • Flyboy Preview +2
  • Flyboy Preview +
  • Lumberjack Deluxe Preview
  • Flyboy Preview
  • Indiana Jones in the Lost Kingdom +7DMW
  • Arhena the Amazon – Special Edition [seuck]
  • Turbo Outrun +5 [easyflash]
  • Missile Command +3DGH
  • Strikkespillet hd +4DT [easyflash]
  • Snow Preview 4 +2
  • Ice Busters +6DGH
  • RetroGameDev Space Shooter Preview +3H
  • RetroGameDev Platform Game Preview +3H
  • Pacman Preview +
  • TRSE Vertical Shooter Preview
  • Wolfling Preview
  • Petch +8DGMH
  • Gunsmoke
  • Gunsmoke [easyflash]
  • Neuromancer [easyflash]
  • Project Stealth Fighter [easyflash]
  • Oil-Imperium [german] [easyflash]
  • Vault Man 2 V1.1 +4H
  • Tetris +J
  • Fallout Hacker +1D
  • Trainsmission +1D
  • Doughboy +9DG
  • Night of the Valkyrie +3DH [seuck]
  • Arhena the Amazon – Special Edition +2H [seuck]
  • Chilly Willy +4DGH

Download: All Games in One Archive (6094)

source: csdb.dk

Ultimate-II – II+ & U64: Nuovo aggiornamento non ufficiale v3.2a v1

E’ stato rilasciato un nuovo aggiornamento firmware per l’interfaccia 1541 Ultimate-II+ / 1541 Ultimate-II e la nuova motherboard C64 Ultimate 64 di Gideon.

Changes in this release (compared to 3.2a):

  • Fast Reset for C64.
  • Improved d64 filesystem.
  • Poweroff function for the U64.
  • FTP Bugfix.
  • Bugfix in Paste function of the file browser.

How to update?

  • For the 1541 Ultimate-II:
    • Navigate to the unzipped file ‘3.2a_180411+_v1.audio.u2u‘ or ‘3.2a_180411+_v1.dualdrive.u2u‘ and select “Run Update”
  • For the 1541 Ultimate-II+:
    • Navigate to the ‘3.2a_180411._v1.u2p‘ file, and select “Run Update”.
  • For the Ultimate 64:
    • Navigate to the ‘3.2a_180411._v1.u64‘ file, and select “Run Update”.

Please note that the Ultimate 64 Firmware is build using a blob containing version 1.02 of the FPGA.

Download: 1541 Ultimate-II / Ultimate-II+ / U64 v3.2a v1 (1065)

source: facebook.com github.com

Ultimate 64 Adesivo con numero seriale by RetroBit Lab

Questo adesivo può essere utilizzato per  Commodore 64 ma con la nuova scheda Ultimate 64 di Gideon installata.

L’archivio include l’immagine in formato .PSD (PhotoShop Document) e le fonts.

Genera il tuo Ultimate64 Badge Online: Ultimate64 badge by Marco Van de Meulenhof

Download: Ultimate 64 PSD Serial Sticker & Fonts (1108)

Ultimate 64 by Gideon

Ultimate 64 by Gideon

The Ultimate 64 è un’implementazione hardware (FPGA) del Commodore 64 e include anche Ultimate-II + / LAN / Wi-Fi / HDMi / RGB e molte altre cose interessanti. Una soluzione ALL IN ONE!

Per ulteriori informazioni e ordini, visitare il sito web.

Ultimate 64 Unboxing:

Ultimate 64 RGB Output Example:

Ultimate 64 RGB Pinout:

Ultimate 64 RGB Pinout Ultimate 64 Scart RGB Pinout

Ultimate 64 Manosoft Princess Ultra C64SD 4.0 Test:

Ultimate 64 SIDTap Alternative Audio Output:

Ultimate 64 DigiFIX resistors removed:

source: ultimate64.com

ZOE rev 2.0 Inty (Mattel Intellivision) RGB Interface

23 April 2018 2 commenti
ZOE rev 2.0 Inty (Mattel Intellivision) RGB Interface

ZOE rev 2.0 Inty (Mattel Intellivision) RGB Interface.

Alcune informazioni di questa revisione:

  • Il cavo flat che collega lo zoccolo maschio IDC DIP 10+10 al connettore femmina IDC 10+10 e’ lungo circa 15cm (nella foto sono: 20cm)
  • Il cavo che collega i 7 connettori dupont alla presa da pannello femmina DIN 8 poli e’ lungo 30cm (nella foto sono: 20cm)
  • Il cavo video con connettore SCART maschio da un capo e DIN maschio 8 poli dall’altro e’ lungo 2 metri.
  • Il cavo audio con connettore dupont da un capo e a saldare dall’altro e’ lungo 20cm.
  • La basetta ZOE va fissata con 3 supporti bioadesivi.
  • LED di stato.
  • Migliorata uscita audio, ci sono un po’ meno di rumori di fondo.
ZOE rev 2.0 Inty (Mattel Intellivision) RGB Interface

La presa da pannello femmina DIN 8 poli puo’ essere posizionata, previo foro, in qualsiasi punto. Io consiglio di utilizzare il foro uscita RF, rimuovendo il modulatore RF che dopo la modifica non è più utilizzabile.

Questa modifica come la precedente funziona SOLO su console Mattel Intellivision dotate di chip LM1886 (D/A Video Matrix Converter). Esempio: PAL/SECAM ma non UK/NTSC (USA). Per avere la massima certezza aprire la console e controllare.

Per tutto il resto dei collegamenti / rimozione LM1886 / disassemblaggio console si puo’ consultare la documentazione della versione precedente.

Presto disponibile per la vendita.

Cerniere di chiusura alternative per il cover del C64

23 April 2018 1 commento
Alternative closing pins for the Commodore 64 case.

Cerniere di chiusura alternative per il cover del C64 fatte con una stampante 3D.

Ho fissato le cerniere con un forte nastro biadesivo.

Galleria:

Hoxs64 v1.0.9.9. Nuovo aggiornamento per l’emulatore di C64

16 April 2018 2 commenti

Hoxs64 scritto da David Horrocks e’ un’ottimo Emulatore di Commodore 64 per Microsoft Windows 2K/XP/Vista/Seven (DirectX 9+).

L’emulatore riproduce sostanzialmente l’elettronica del Commodore 64 via software.

Changelog (v1.0.9.8 > v1.0.9.9):

  • New joystick configuration and fixes. Multiple host game device buttons can be assigned to a C64 joystick funct
  • ion.Fixed audio clock sync sound bug that can happen when running a monitor FPS that is less than the emulated FPS.

Download:

source: hoxs64.net

TheC64 Mini Aggiornamento Firmware v1.0.7

Gli aggiornamenti del firmware per THEC64 Mini forniscono nuove funzionalità e/o correggono eventuali bug software.

Si consiglia sempre di utilizzare l’ultima versione del firmware.

Version 1.0.7 – Changes:

  • Fixes an issue encountered on some two-player games when using two USB joysticks

Download: TheC64 Mini Firmware v1.0.7 (1387)

source: thec64.com

TheC64 Mini Aggiornamento Firmware v1.0.6

Gli aggiornamenti del firmware per THEC64 Mini forniscono nuove funzionalità e/o correggono eventuali bug software.

Si consiglia sempre di utilizzare l’ultima versione del firmware.

Version 1.0.6 – Changes:

  • Maps additional functions to joystick buttons for some games.
  • Makes minor changes to descriptions for some games.
  • Fixes an occasional scenario where an additional USB joystick is not detected until a restart.
  • Fixes an intermittent audio click when opening the THEC64 Mini’s MENU in-game.

Download: TheC64 Mini Firmware v1.0.6 (945)

source: thec64.com

Ultimate-64 aggiornamento Firmware – Core v1.02

E’ stato rilasciato un nuovo aggiornamento firmware per l’Ultimate-64 di Gideon.

Changelog:

  • Sprite Collisions.
  • Illegal graphics fetches.
  • Sprite DMA timing.
  • Nuvie Player.
  • NMI handling improved in 6502.
  • Illegal reads when BA=0 masked out (“PLA” issue)
  • Added debounce on Restore Key.
  • KCS power cart fixed (sprite graphics error)
  • HDMI/DVI Compatibility.

.. and there are many improvements not present in the changelog.

Download: Ultimate-64 Firmware Core v1.02 (904)

source: ultimate64.com

Rilasciato Vampire GOLD2.9 Core per V600 v2 & V500 v2(+)

Rilasciato il nuovo firmware per la Vampire GOLD2.9 Core hardware V600 v2 & V500 v2(+) e nuovi Saga Driver v1.3

Vampire GOLD2.9 Changelog:

  • Improved Power-OFF/ON on Amiga
  • Allow software to access on-board ROM chip
  • MapROM mapping support for Atari roms
  • Memory management support for Atari memory map
  • FPU Speed-up (51Mflops at x11 according to SysInfo)
  • FPU fully working under TOS
  • Modified Expansion post pin-out
  • Boot to EmuTOS with FIRE button on Power-ON

SAGA Driver v1.2/1.3 Changelog:

  • Updated VControl to 1.4
  • Added V2ExpEth.device 1.2
  • Updated SDNet.device to 1.2
  • Some more work on TX stability
  • Should recover from ENC Module hangs more often
  • Aligned with future EXPnet

Download: Vampire Core & Saga Driver (1317)

source: apollo-accelerators.com

Revision 2018 – C64 Party results

Questi sono i risultati ufficiali del Demo party Revision 2018 che si e’ concluso il 2 Aprile 2018. Per maggiori informazioni o aggiornamenti visita il sito CSDB nella sezione Revision 2018.

C64 4K Intro:

  • 7 – Prutske by Royal Belgian Beer Squadron

Mixed:

  • 5 – Midnight Tryst by Lft (Graphics)
  • 9 – Huhu from Space by Titus (Graphics)
  • 10 – The Kids are Allright by Titus (Graphics)
  • 12 – Sailing the Revision Seas by Oemfoe (Graphics)

Mixed Graphics:

  • 6 – Android Runner by Rabenauge
  • 9 – Eha@eWerk by Abyss Connection
  • 11 – The Tree by Nodepond

Mixed Music:

  • 1 – LiSUterine Taste [2sid] by Factor6
  • 2 – Could Be Cool by Censor Design, MultiStyle Labs
  • 10 – Get Up and JUMP! [2sid] by Unreal
  • 13 – Schmissiger Schiss by AttentionWhore

Mixed Demo:

  • 1 – We Come in Peace by Censor Design, Fairlight, Offence
  • 5 – TV-One by One
  • 9 – Hello C64 by Methos

Mixed Game:

  • 1 – Crank Crank Revolution by Lft, redcrab

Productions released outside compos:

  • Petscii Choir (Graphics)
  • Snek +1 by Bad Taste (Crack)

Download: Revision 2018 Party stuff (957)

source: 2018.revision-party.net