Archivio

Posts Tagged ‘firmware’

1541 Ultimate II: Nuovo firmware v2.6d

13 February 2013 Nessun commento

E’ stato rilasciato un nuovo aggiornamento firmware per l’interfaccia 1541 Ultimate II di Gideon. Questa versione del firmware funziona solo con la versione della cartuccia 1541 Ultimate II (nuovo fpga).

Version 2.6d includes some new features and fixes:

  • FIXED: Ultimax mode forced now correctly implemented (solves issue with freeze and DMA load)
  • FIXED: Updater now works on C128… (not all C128 issues are fixed)
  • ADDED: Programmable cartrige emulation timing.
  • IMPROVED: Some drive emulation enhancements.

Release notes:

  • This version does *not* include SID, but it does include the Ultimate Audio module. Different builds may become available upon request.
  • The internal copier is still in beta. It has been tested with some of my drives, but there might be drives out there that won’t work. Make sure you have an IEC link from the Ultimate to a real drive to use this function. (No need to have a link to the computer.) There is still no retry mechanism; sectors that failed to read correctly will not be re-read.
  • The Kernal replacement function is critical when it comes to timing. Tested on two machines only. Might not work on all C128.

Download: 1541 Ultimate II Firmware v2.6d (1236)

source: 1541ultimate.net

1541 Ultimate II: Nuovo firmware v2.6c

E’ stato rilasciato un nuovo aggiornamento firmware per l’interfaccia 1541 Ultimate II di Gideon. Questa versione del firmware funziona solo con la versione della cartuccia 1541 Ultimate II (nuovo fpga).

Version 2.6c includes some new features and fixes:

  • NEW: Disk Copier from real drives to .D64 images.
  • NEW: Command Interface.
  • NEW: Ultimate-II DOS V1.0 (command target)
  • NEW: Kernal replacement function.
  • FIXED: TAP file recorder failed miserably on high latency write devices. Rewritten; should work better now.
  • FIXED: Drive data timing has improved. Timing is now dependent on the data track itself, not on the speed setting of the VIA. This fixes some protected titles in G64 format.
  • FIXED: USB stick present on boot time caused the Ultimate-II to crash when loading a file from SD at initialisation time (kernal rom / drive rom)
  • FIXED: Starting a program with RUN sometimes caused the ultimate to become unresponsive when freezing afterwards.
  • FIXED: Now reads USB sticks with FAT16 format, but without partition table.

Release notes:

  • This version does *not* include SID, but it does include the Ultimate Audio module. Different builds may become available upon request.
  • The internal copier is still in beta. It has been tested with some of my drives, but there might be drives out there that won’t work. Make sure you have an IEC link from the Ultimate to a real drive to use this function. (No need to have a link to the computer.) There is still no retry mechanism; sectors that failed to read correctly will not be re-read.
  • The Kernal replacement function is critical when it comes to timing. Tested on two machines only. Might not work on C128.

Download: 1541 Ultimate II Firmware v2.6c (1170)

source: 1541ultimate.net

Everdrive N64 – OS Update v1.29 released

21 January 2013 2 commenti

E’ stato rilasciato un nuovo aggiornamento del sistema operativo (OS) per la Everdrive N64 Flash Cartridge (Nintendo 64) di Krikzz. Le istruzioni per l’aggiornamento le potete trovare qui.

Changelog:

  • Allows to load/save controller pak to file. Please use any .mpk file and c-down button. It works only if controller pak plugged into joy port1. /ED64/dummy.mpk file can be used for exchange.
  • Ability to force default save type.
  • Ability to force M-PAL TV mode. Not sure if it work properly, cuz i don’t have PAL-M system for tests.
  • Os can run Banjo-Tooie U without manual patching.

Download: Everdrive N64 - OS Update v1.29 (1543)

source: krikzz.com

Rilasciato il nuovo fimware v0.1.5 per la Flash Cartridge SD2Snes

19 November 2012 Nessun commento

E’ stato rilasciato il nuovo firmware per la SD2Snes Flash Cartridge (Super Nintendo/Famicom) di Ikari. Le istruzioni per l’aggiornamento le potete trovare here.

Changelog:

  • Menu: Files are now sorted by their entire file name instead of the first 20 characters only.
  • Menu: Ignore input from non-standard controllers (Super Scope, Mouse etc.)
  • SPC player: fix soft fade-in (first note cut off) on S-APU consoles (1CHIP / some Jr.)
  • More accurate BS-X memory map.
  • Correctly map SRAM larger than 8192 bytes (HiROM) / 32768 bytes (LoROM), fixes Dezaemon, Ongaku Tsukuuru – Kanadeeru
  • Minor memory access timing tweaks (should help with occasional glitches on some systems)

Download: SD2Snes Firmware v0.1.5 (1242)

source: sd2snes.de

1541 Ultimate II: New firmware v2.5 and v2.5+

E’ stato rilasciato un nuovo aggiornamento firmware per l’interfaccia 1541 Ultimate II di Gideon. Questa versione del firmware funziona solo con la versione della cartuccia 1541 Ultimate II (nuovo fpga).

Version 2.5 includes some new features:

  • File viewer.
  • Selectable colors in user interface.

This version also includes some fixes for nasty memory allocation bugs that existed when using USB sticks. Removal of a USB device is now at least a lot safer. Also, some file system bugs were fixed.

Version 2.5+ includes some new features:

The ‘plus’ version of 2.5 including a special 7-voice audio engine. This version is based on the same 2.5 with the bugfixes and a special FPGA build can it only supports ONE floppy drive, in favor of extra audio functionality.

Download:

source: 1541ultimate.net

1541 Ultimate II: Aggiornamento firmware v2.5x (Ultimate Audio Module)

E’ stato rilasciato un nuovo aggiornamento firmware per l’interfaccia 1541 Ultimate II di Gideon. Questa versione del firmware funziona solo con la versione della cartuccia 1541 Ultimate II (nuovo fpga).

New features:

The ‘Ultimate Audio’ feature is a new feature for the 1541 Ultimate-II module. It implements multi- channel audio sample playback support from REU memory, and is an exciting addition to the possibilities this cartridge offers.

Download:

source: 1541ultimate.net

Rilasciato il nuovo firmware 8b beta per l’interfaccia Chameleon

La cartuccia Chameleon Turbo 64 è estremamente facile da utilizzare dal momento che non serve aprire il proprio computer perche’ si collega alla porta di espansione del C64.

La cartuccia può funzionare anche come unità “stand-alone” questo perche’ al suo interno il cuore e’ un chip FPGA che emula quasi (ancora in beta) del tutto un Commodore 64, compreso il Floppy Drive e puo’ essere collegata ad un normale monitor VGA (LCD o CRT).

Changelog:

  • New VGA controller with new modes and VIC-II sync.
  • Tripple buffering mode added for properly displaying IFLI pictures.
  • Scale-2x video scaling algorithm added.
  • Scanline emulation added.
  • In cartridge mode real CIAs registers and interrupts are used (allows use of a modem).
  • In cartridge mode real VIC-II registers and interrupts are used (allows use of a lightpen).
  • Fixed I/O assignments for FPGA (lower power use).
  • Lowlevel SD-card functions now use multiple block reads if possible, which increases linear reading speed by about 40 to 50% (most noticeable on large files, such as REU images)
  • BUGFIX: fixed error handling and timeouts of the IEC routines, which makes all related operations more robust.
  • BUGFIX: added missing timeouts to SD-card functions.
  • Joystick port 1 now also works for navigating the menus.
  • BUGFIX: on some C64s pressing shift would result in phantom keypresses (F1/F2) under some conditions.
  • NEW: various new VGA modes and other options for the new VGA controller (see manual)
  • Improved loading speed of file inside T64 images.
  • Improved keyboard handling to make the browser a bit snappier.
  • BUGFIX: the size of the character ROM saved by the ROM saver was incorrect.
  • BUGFIX: .wav player stops at the end of the file and does not continue playing garbage.
  • BUGFIX: files bigger than 2k are displayed correctly by the .txt viewer.
  • BUGFIX: when copying files out of a t64 image the resulting file was missing the last two bytes and/or the last block was missing completely.
  • BUGFIX: filecopy from/to a IEC device did incorrectly abort after 1 block.
  • BUGFIX: filecopy filename character set conversion was broken.
  • BUGFIX: AR/RR ROM was not correctly disabled when autostarting programs from the filebrowser with AR/RR enabled as default cartridge.
  • NEW: added DOS wedge command (see manual)
  • NEW: added load and save commands (see manual)

Download: Chameleon 64 beta firmware 8b (1554)

source: beta.icomp.de

Everdrive N64 – OS Update v1.28 released

E’ stato rilasciato un nuovo aggiornamento del sistema operativo (OS) per la Everdrive N64 Flash Cartridge (Nintendo 64) di Krikzz. Le istruzioni per l’aggiornamento le potete trovare qui.

Changelog:

  • SRAM saves bugfix.

Download: Everdrive N64 - OS Update v1.28 (1230)

source: krikzz.com

Everdrive MD – OS Update v35 released

E’ stato rilasciato un nuovo aggiornamento del sistema operativo (OS) per la Everdrive MD Flash Cartridge (Megadrive/Genesis) di Krikzz. Le istruzioni per l’aggiornamento le potete trovare qui.

Changelog:

  • SRAM auto backup bug was fixed.

Download: Everdrive MD - OS Update v35 (1983)

source: krikzz.com

SD2Snes Firmware v0.1.4a released

E’ stato rilasciato il nuovo firmware per la SD2Snes Flash Cartridge (Super Nintendo/Famicom) di Ikari. Le istruzioni per l’aggiornamento le potete trovare here.

Changelog:

  • Fix DMA initialization in the menu (could cause sprite corruption in some games)

Download: SD2Snes Firmware v0.1.4a (1106)

source: sd2snes.de

HxC Floppy Emulator: Rilasciato il Firmware v1.7.1.2

L’interfaccia ‘HxC Floppy Drive Emulator‘ è un sistema hardware e software creato da jfdn aka Jeff.

L’obiettivo di questo progetto è quello di sostituire l’unità floppy disk con un dispositivo elettronico che emula il floppy drive (lista dell’hardware supportato).

Esistono due interfaccie di emulazione:

  • Una versione USB che permette di collegare l’interfaccia floppy disk drive del computer a un PC tramite un cavo USB.
  • Una versione SDCARD che permette di emulare i floppy disk tramite le immagini memorizzate su una SDCARD.

Firmware SD HxCFloppyEmulator v1.7.1.2:

  • Drive A <> Drive B constant polling issue corrected (Atari ST).
  • Better SD Card error handling.

Firmware SD HxCFloppyEmulator v1.7.1.1:

  • New embedded setting menu : To access this menu remove the SDCard and press the select button.
    • By this menu you can:
    • Change the floppy Interface mode.
    • Change the bitrate.
    • Change the track step mode.
    • Enable/disable the drive B.
    • Enable/disable the step sound.
    • Set the user interface sound volume.
    • Set the backlight timing.
    • Set the standby timing.
    • Check the software and bootloader version (integrity test included).
    • Clear/reset the settings and reset the Emulator.
    • Exit this menu…
  • SD Card: Issue with some sd card corrected : Incompatibility with some SD chipset corrected.
  • Write support: Timing for MFM / FM 250/300/500KBits/s write support readjusted. DataMark supported : 0xFB,0xF8 (deleted data mark), 0xFA,0xF9. HFE file format enhanced : Track 0 Side 0 & Track 0 Side 1 track write mode can be different from the others tracks.
  • New track seek algorithm: Faster track seek/settle time -> Faster Loading time !
  • Flip disk function: the disk image can now be flipped (reverse side 0<->side 1).
  • Bad track number at power up corrected (E-mu Emulator I/II, SP1200, Linn/Forat 9000…)
  • Experimental “Rev2″ HFE support : Correct some issue with some Amiga games/demos.
  • Lots of internals code optimization…

Download:

source: hxc2001.free.fr

Everdrive MD – OS Update v34 released

E’ stato rilasciato un nuovo aggiornamento del sistema operativo (OS) per la Everdrive MD Flash Cartridge (Megadrive/Genesis) di Krikzz. Le istruzioni per l’aggiornamento le potete trovare qui.

Changelog:

  • Fixed underscan problem for old TV-sets.

Download: Everdrive MD - OS Update v34 (820)

source: krikzz.com

SD2Snes Firmware v0.1.4 released

E’ stato rilasciato il nuovo firmware per la SD2Snes Flash Cartridge (Super Nintendo/Famicom) di Ikari. Le istruzioni per l’aggiornamento le potete trovare here.

Changelog:

  • SPC Player (contributed by necronomfive/blargg)
  • System Information screen now shows CPU/PPU revision (contributed by necronomfive)
  • Satellaview: basic data transmission packet support (makes some more games boot, thanks to LuigiBlood for assistance and sample data packets)
  • Number of supported files increased to 50000 per card / 16380 per directory.
  • Slight speedup of menu text rendering.
  • Reduce load time of menu.
  • Adjust Cx4 timing to be more faithful (Mega Man now defeats the boss in attract mode in Mega Man X2)
  • adapt ROM mirroring size to file size if header information is invalid (fixes Super Noah’s Ark 3D, possibly others)
  • MSU1 interface changes suggested by byuu:
    • Data offset 0 and audio track 0 are automatically requested on reset. This causes the busy flags to become 0 shortly after reset/startup.
    • $2000 bit 3 is now “audio error”, becomes valid after “audio busy” -> 0 set when an error occurred while preparing playback of the requested audio track write LED stays on when SRAM content changes constantly.
  • Fixes:
  • fix empty save files on FAT16 / incorrect free cluster count on FAT32.
  • correct directory sorting (force parent directory at top of list)
  • fix text corruption when entering a directory with a scrollable name.
  • fix files/dirs count in system information.
  • make ‘sd2snes’ directory hiding case-insensitive.
  • improve DAC I²S timing.
  • fix occasional palette corruption in menu.
  • fix SD clock glitch on ROM loading (occasional glitches/crashes)
  • fix memory write timing on ROM loading (occasional glitches/crashes)
  • fix SPI timing (ROMs not loading; System Information not working)
  • properly synchronize SNES control signals (occasional glitches/crashes)
  • fix floating IRQ output (occasional glitches/slowdowns)

Download: SD2Snes Firmware v0.1.4 (1085)

source: sd2snes.de

Rilasciato il nuovo firmware 7b beta per l’interfaccia Chameleon

La cartuccia Chameleon Turbo 64 è estremamente facile da utilizzare dal momento che non serve aprire il proprio computer perche’ si collega alla porta di espansione del C64.

La cartuccia può funzionare anche come unità “stand-alone” questo perche’ al suo interno il cuore e’ un chip FPGA che emula quasi (ancora in beta) del tutto un Commodore 64, compreso il Floppy Drive e puo’ essere collegata ad un normale monitor VGA (LCD o CRT).

Changelog:

  • fixed REU, transfer length register is 1 after a transfer completes.
  • fixed REU 512K wrap around.
  • fixed cache controller preventing corruption when accessing 0x1FFFF0000 – 0x1FFFFFFFF
  • faster SDRAM controller. More memory bandwidth for turbo.
  • added slowdown modes to the Turbo settings. Offering CPU speeds of 25%, 50%, 75% and 100%.
  • added native updater program (see manual) to update the fpga core without an usb connection.
  • make menu item active when pressing a hotkey, so it is selected when going back to the respective menu.
  • correctly mute/unmute second sid in menu freezer.
  • clockport- and rr-net- items in options menu are correctly disabled if either is not available.
  • if found, load and run update.prg from sd card (chameleon updater)
  • if “boot from sd card” is enabled, load boot.prg from sd card (regular c64 boot program)
  • improved navigation in one panel mode, cursor right enters subdir/image and cursor left goes one level up.
  • improved quickfind, just type a filename quickly to jump to it.
  • mount menu is skipped if there would only be one active item.
  • when returning to the menu from the sid player by pressing left/menu button it will go directly to the filebrowser.
  • added gfx viewer for various multi-color and hires formats.(see manual)
  • added wav player (see manual)
  • added filecopy (F5 in two panel mode, see manual)
  • set $030c-$030e to 0 before starting prgs, increases compatibility with certain packers.
  • .sid files which actually contain a basic program can now be run correctly.
  • re-read destination panel after copying image.

Download: Chameleon Beta-7b release (1583)

source: beta.icomp.de

EasyFlash 3 CPLD Firmware v1.0.0

E’ stato rilasciato il nuovo firmware per la cartuccia EasyFlash 3 di Skoe. Le istruzioni per l’aggiornamento le potete trovare qui.

Changelog:

Version 1.0.0 – 06.06.2012

  • USB and I/O2 RAM are also active in KERNAL mode
  • Allows USB-related features in a special KERNAL currently being developed.
  • KERNAL implementation uses a cleaner timing now.
  • CPLD Version register added ($de08). It will be displayed in the next menu version, not release yet.
  • Improved C128 support.
  • 2 MHz mode works in EasyFlash mode (needed for PoP)
  • Added a way to leave to C64 mode or to C128 mode.
  • Will need a menu update, not release yet.
  • Still NO external KERNAL on C128! Many optimizations to get all this crap into the CPLD.

Some of the features will need a software update which is not release yet. Do not try to start an external KERNAL on the C128, it will crash.

Download: EasyFlash 3 CPLD Firmware v1.0.0 (1347)

source: forum64.de